I'm turning some necklace type pendants with the Joyner offset fixture. What are people using for finish? The woods I'm using are various Rosewoods (Dalbergia) like Tulipwood, Kingwood, Cocobolo that are not the easiest to put a film finish on. Just buff and microcrystalline wax, lacquer, polyurethane, etc. Wipe with acetone or naptha first? Thanks for any ideas.
... a polish such as padding lacquer, Myland's friction polish or Zinsser's French Polish. They've all worked for me. They give you a nice uniform gloss right off the rag.
Darrin My pendant's vary from just a smooth round piece of wood to pieces with lots of cuts and details. consequently my finish varies. Most of the time I use gloss lacquer because that's what I have handy since my spray gun (and my sidearm) stay loaded.
What I will do is knock the gloss down with 4/0 steel wool on pieces that I think look plastic or garrish with high gloss. If the surface from the wool is too soft then I use paste wax over it to bring the shine back up. The wax and wool shine is more natural than the gloss straight from the can and I like it a lot.