Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Jet parts help

Posts

Jet parts help

#1

Keith Tompkins

Jet parts help

Keith Tompkins

My Jet afs1000b air filter went up in smoke...the motor shorted out. Do you have a good, reliable source for Jet parts? Jet's website is very poor. Thanks in advance! Keith

Re: Jet parts help

#2

Rob Wallace

Re: Jet parts help

Rob Wallace

Hi Keith!

(It's been nearly 24 hours since we were on the phone together! ;) )

I suggest you investigate getting the motor re-wound at a local motor shop. I had a band saw motor "fry" about 2 years ago, and the cost for a new motor was WAAAY too expensive, at least in my opinion ($ 275 - $300; I expect Jet parts to be even more expensive than "reasonable"). I took the bandsaw motor to my local motor repair shop and they did their magic for about $ 85, which included installation of new bearings, cleaning all contacts, and testing the start capacitor (which I replaced anyway). The rebuilt motor runs perfectly.

If they can't do it at your local repair shop, they'll tell you, and you'd be back to where you are now, but at least you'll go through the possibility of a less expensive fix first. They also might have a rebuilt motor that would work for far less money than a new part stocked from Jet.

Just a thought to get the repair done for less cost, etc.

Hope it works out!

Rob

Re: Jet parts help

#3

Keith Tompkins

Re: Jet parts help

Keith Tompkins

Thanks Rob...and I saw somewhere you'll be demoing in Calif? :D

Re: Jet parts help

#4

Ellis Walentine

Try their phone line

Ellis Walentine

Jet used to have a pretty serious telephone-based customer service team last time I visited their HQ. But I do agree with Rob that if the machine is out of warranty, you will get a much better deal at a local motor shop, particularly if you have to buy a new motor.

Ellis

Re: Jet parts help

#5

Keith Tompkins

Re: Try their phone line

Keith Tompkins

Hey Ellis,

I spoke with the electric shop...the motor is fried; unfixable. I'll keep looking for a replacement. Thanks..

Re: Jet parts help

#6

Re: Try their phone line *LINK*

John Jordan

Keith, call these guys. They have probably hundreds of damaged dust collectors, and all sorts of Jet machines. They buy them by the truckload. They're sort of odd, but I have bought a lot of stuff from them over the years.

John


http://www.generalindustrial.com/

Re: Jet parts help

#7

Keith Tompkins

Re: Try their phone line

Keith Tompkins

Thanks, John..I will!

Re: Jet parts help

#8

Re: Jet parts help

Mike from Saint Clair Shores

Keith,

Another place I have used many times is surplus center. Call them and ask to talk to tech support. Give them all the vital info on the motor, and they will tell you if they have a replacement.

Mike

http://www.surpluscenter.com/

Re: Jet parts help

#9

Keith Tompkins

Re: Jet parts help

Keith Tompkins

Hi Mike...thanks for the responses. I ended up buying a new motor from a local Jet vendor.