I saw the post from Jorge the other day about getting his hands on some fresh American Beech. There were several responses about how unstable it is while drying. I can only agree. I recently picked up several fairly large pieces (15" diam) from a friend so I could practice coring with my McNaughton Center Saver. I also cut some as quartersawn for eventual plane making but that's another story. I cut out a 14" blank and put it on my lathe and roughed it out for coring. I only got 1 real core which is why I want to practice more. The large bowl in the photo is now 13 1/2" long and 12" wide. I still need to turn off the foot. It did not crack but shrunk very oval. It's about 3/8" thick. I did not wax it or bag it or try to slow the drying in any way. Just left it sit where you see it. The smaller bowl was treated the same way and also warped a bit. I sanded that one and will give it to my friend as a thank you gift.
This is the most successful I have been with Beech. Smaller pieces do work for kitchen type items turned in spindle orientation.
Good luck Jorge if you decide to use what you got.