Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Finish for spalted wood Question

Posts

Finish for spalted wood Question

#1

Finish for spalted wood Question

Barry Irby

I posted this on the flat side too, but I figure a lot of you have turned spalted wood and may have relevant experience.

My son (with a little help from his male parent) has built a Krenov style cabinet out of spalted maple. The color is very appealing the way it is, but we sprayed a sample with lacquer and it darkened it considerably. Is there any finish that won't darken it or at least darken it less?

Re: Finish for spalted wood Question

#2

Re: Finish for spalted wood Question

Carole Valentine

Barry, on my light wood turnings, I put on a thinned wash of Deft clear and lacquer thinner (50/50 mix), wipe it dry then let it dry completely. Go over it with very fine steel wool, then apply my finish (Waterlox in my case). Works well for me to prevent darkening of the wood. Don't use steel wool if you are going to use a water-based finish.