Back At The Lathe - Finally!!!!
Dick Wilson
I have been out of the shop for a month with chest crud. The dust really put me down. And just what lump of wood did I select to restart my turning fun? Eucalyptus Red Gum Burl!!!!!!!!!!!!! A really smart choice. I have turned a lot of dry Aromatic Red Cedar and always thought it is the nastiest wood on the planet. WRONGGGGGGGG!!!! This stuff is by far the nastiest. It is harder than a rock and dense. The "shavings" come off the tool as either fine red dust or granules the size of coffee grounds. A dust mask and vacuum hood are mandatory!
I bought this piece when I was at the Ohio Valley symposium and because have never turned it I asked Richard Raffan about it. He said that if I have never turned it before that he strongly recommended that I not try to turn it thin. Sooo, I turned the outside profile I wanted and before hollowing it I duct taped the entire outside. The entire piece is nothing but crevasses. Safety first.....I didn't want a spinning hand gernade while hollowing. Yup, I am cowardly 
Anyway, the piece is approx 8" tall x 6" wide with a 1/2" wall thickness. Finished with Deft rattle can lacquer. Buffing to come. C & C welcome as always. Sorry for the lousy pic. 



