Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

A spatula for my sister

Posts

A spatula for my sister

#1

A spatula for my sister

Craig Daymon

This really stretched the capacity of my Jet mini. The tailstock was about half way on. I used an oscillating spindle sander with a 4" drum to contour the blade inside and a disk sanding pad mounted on the lathe to contour the blade outside.



The finish is Mike Mahoney's Walnut Oil. The crossed toothpicks in the sponge made for a great drying rack.

This weekend, I'll make her a spoon from the same stock.

Comments/critiques welcome.

-Craig

Re: A spatula for my sister

#2

Dale Jablonski

Re: A spatula for my sister

dale jablonski

Nice job! I'm sure she'll like it.

Re: A spatula for my sister

#3

Very pretty


Re: A spatula for my sister

#4

Steven Antonucci

What do the letters spell?

steven antonucci

I can't see that small.

Nice spatula. I made a bunch a while back, and I need to make some more. They work great around the kitchen.

Steve

Re: A spatula for my sister

#5

Re: What do the letters spell?

Craig Daymon

To

---

(My sister's initials)

---

From

---

(My initials)

My handwriting is just as bad with a pen, unfortunately.

Re: A spatula for my sister

#6

Lyle Jamieson

Re: A spatula for my sister

Lyle Jamieson

Will it be used or displayed?? I like the detail you did, looks great. Good news-bad news. The detail near the spoon and will be hard to clean food particles from the tight groove it the detail. If its functional you might want to rethink the design elements.

Re: A spatula for my sister

#7

Re: A spatula for my sister

Jim Rutten

My wife wants to know if you have every considered adopting into your family. :D

Re: A spatula for my sister

#8

Re: A spatula for my sister

Craig Daymon

I expect it to be used.

I understand the concern, but the grooves are open enough that I know I wouldn't have a problem cleaning it. Also, the blade is long enough that in normal use it shouldn't gather any food in the grooves.

If I went with the same design for the spoon, the grooves might collect some, but again, I wouldn't have any problem cleaning the grooves.

I might vary the design for the spoon.

-Craig