Further to finials...
Ellis Walentine
I've been really intrigued with finial design since our chat with Cindy last week, so I thought I'd try a few ideas out. One was to start with a blank of wood and make a finial, for no particular vessel or object, and then design the object to complement the finial, using Cindy's concept of the "implied line" (red dashed lines in this sketch) to make the shapes flow visually.
Last night, I turned this finial, then photographed it and used it to make this layout sheet for designing the vessel. You can draw multiple sketches on the sheet to try to visualize different shapes. I tried making the finial about 2/5 of the total height of the composition, and I tried combining those proportions with ideal proportions within the elements themselves. I still find that drawing the curves by eyeball yields the most pleasing (to me at least) proportions.
Next I'll try making the vessel shape first, then designing the finial to match. Regardless of where you start, the sum of the two parts has to equal a visually pleasing whole; and that's not so easy when you're turning the parts separately. I think the drawing sheet helps.
Ellis






