Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Magnetic mounting of Jet Midi controller

Posts

Magnetic mounting of Jet Midi controller

#1

Magnetic mounting of Jet Midi controller

Jim H

I turn from a seated position and reaching the power/ speed controller puts me directly in the line of fire. I was thinking of adding magnets/longer wire to the control box so that I could stick it to my right. I am worried about the effect of a strong magnetic field on the circuit board of something that was not originally designed for it. Any thoughts or experience?

Re: Magnetic mounting of Jet Midi controller

#2

JL

Re: Magnetic mounting of Jet Midi controller

JL

I don't believe longer wire would be a problem. I am leery of using magnets around electronic circuit boards. I have had one circuit board "misbehave" after a rare earth magnet was placed in close proximity.

The manufacturers of some magnets warn against putting them near computers, musical equipment and televisions. While I don't know if your circuit board would be affected - why take a chance?

Re: Magnetic mounting of Jet Midi controller

#3

Re: Magnetic mounting of Jet Midi controller

Jim H

That’s kind of what I was afraid of. Most of the bigger lathes that use pendent controllers use magnets, but are probably designed with that in mind. Maybe I will just permanently mount it to the tailstock end of the lathe, that will at least keep me out of the line of fire when starting or changing speeds.

Re: Magnetic mounting of Jet Midi controller

#4

Re: Magnetic mounting of Jet Midi controller

Pete in Holland MI

If you're gonna move it, them permanently mount it. When things are going badly and you need to turn the lathe off, instinct will take your hand to the stop button. If it is in a different location all the time, you have to look & think first.

That 1 second could make all the difference.

My 3 cents......

Re: Magnetic mounting of Jet Midi controller

#5

Re: Magnetic mounting of Jet Midi controller

Jim H

Good point, hadn’t thought of that.

Re: Magnetic mounting of Jet Midi controller

#6

Re: Magnetic mounting of Jet Midi controller

mark j. thill

I use a foot switch and it works great, got it at woodworkers supply for $20.00.

Re: Magnetic mounting of Jet Midi controller

#7

Re: Magnetic mounting of Jet Midi controller

Bill Turpin in WNC mountains

I put the PSI variable speed motor kit on a Fische lathe. The controller is mounted with 3/4" RE magnets. It works fine.

Re: Magnetic mounting of Jet Midi controller

#8

Re: Magnetic mounting of Jet Midi controller

Jim H

Thanks all for your help and suggestions.

Re: Magnetic mounting of Jet Midi controller

#9

Magnets NOT a problem!

Don Evans

Magnets will not affect the electronics of the controller. But there is one thing you have to make sure of to insure that, that is THE MAGNETS CANNOT MOVE in relation to the controller. As long as they are permanently mounted on the controller box so they don't move it will have NO effect.

It is true that you can induce a voltage in wiring by moving the magnet back and forth over a wire and even more effective with a coil of wire, but if the magnet is stationary in relation to the electronics NO voltage will be induced.

So point is, mount the magnets to the box and not to the lathe you'll be ok. Some would say well how else would you do it, some may mount a metal strip on the box and the magnets to lathe and that should not be done.

As far as computers, audio equipment are concerned magnets will erase CD, DVD and tape and that is why they say don't put them near them. On the TV the picture tube TV's use magnets to control the electron beam that paints the picture. (it really uses coils to make magnetism to do it just like one of those big machines at junk yard that picks up metal, not permanent magnets)

Don

Re: Magnetic mounting of Jet Midi controller

#10

Alan Zenreich

Re: Magnets NOT a problem!

Alan Zenreich

"...concerned magnets will erase CD, DVD..."

Nope... CD and DVD disks are burned with a laser (to create the pits) and are not magnetic. So these kinds of disks are totally immune to magnets.

Of course, if you really want to threaten a DVD, put it on a slab of gold and point a high power laser at it. Don't be surprised if you hear someone say "No Mr. Bond, I expect you to die"

http://www.youtube.com/watch?v=U1TmeBd9338

Re: Magnetic mounting of Jet Midi controller

#11

Re: Magnets NOT a problem!

Don Evans

Yep, I know that, I guess Perry isn't only one that has "brain freezes" now and again.

But when the magnet and computer issue came along it was all tape backups and floppy disk which magnets will erase. That was really the point that it has nothing to do with the electronics that would take a magnet that would do lots more damage to things around the home than just the computer.

Don