Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Thinning water-based to wipe on?

Posts

Thinning water-based to wipe on?

#1

Thinning water-based to wipe on?

Craig Daymon

I'm wondering if it is possible to thin water-based finishes (using distilled water) to use as a wipe on finish. I'm thinking it would be better than oil based for places like the inside of boxes. Anyone ever tried it? Any suggestions or things to consider?

Thanks,

Craig

Re: Thinning water-based to wipe on?

#2

Re: Thinning water-based to wipe on?

John Veerkamp

My experience with WB is that it is thin enough from the can to wipe on. You do need to work quickly and DO NOT overwork.

Re: Thinning water-based to wipe on?

#3

Ellis Walentine

It works great

Ellis Walentine

I've been using Velvit Aqua-Shield as a wipe-on finish for quite a while now. It is quite thin right from the bottle and dries very fast. I find it makes a good sealer coat for woods that I don't want to darken too much with oil finishes. You can sand it back and get a nice build in fairly short order. I imagine this would work with most of the WB products out there. Most don't recommend thinning very much, if at all. Check the directions on the can.

Ellis

Re: Thinning water-based to wipe on?

#4

Donna Parrillo

Re: Thinning water-based to wipe on?

Donna Parrillo

Minwax makes a Water-based wipe on poly.

Re: Thinning water-based to wipe on?

#5

Re: Thinning water-based to wipe on?

john lucas

It's a good product. I'm going to buy some more tonight. I tend to use it during the winter because it's hard for me to spray lacquer when It's cold outside and I have open flames in the shop. I may be dumb but I'm not stupid. :)

Re: Thinning water-based to wipe on?

#6

I don't thin General Finishes High......

JamieDonaldson

...Performance H2O based finish to wipe on, and don't make the mistake of wiping it too much as it skims over very quickly. I also just bought a can of the GF Woodturners Finish which is an H2O finish, but haven't had a chance to use it yet.