Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Turning BIG vessels....

Posts

Turning BIG vessels....

#1

Turning BIG vessels....

Wally Dickerman

Check out the work done by Anatoly Tsiris....

I turned for years on a John Nichols custom lathe, but it sure never put out work like this.....

http://www.anatolytsiris.com/?page_id=28

Re: Turning BIG vessels....

#2

Dennis in Southern Oregon

Re: Turning BIG vessels....

Dennis in Southern Oregon

He doesn't seem to show how he hollows the tall forms. Maybe he doesn't!

Dennis

Re: Turning BIG vessels....

#3

Re: Turning BIG vessels....

Wally Dickerman

If you search around on the site you'll see him using a hollowing tool that must be 12 ft. long. Some of those pieces are taller than he is. 6 ft. maybe?

Re: Turning BIG vessels....

#4

Dennis in Southern Oregon

Re: Turning BIG vessels....

Dennis in Southern Oregon

Thanks Wally, I finally found it. I guess I didn't scroll down far enough the first time through.

Dennis

Re: Turning BIG vessels....

#5

Re: Turning BIG vessels....

Lan Brady

He had 3 of his vessels at the NC Symposium this weekend.

Absolutely breathtaking pieces!

Lan

Re: Turning BIG vessels....

#6

Re: Turning BIG vessels....

Ian Jeffcock

Impressive work, but horrible music on his video.