Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Headed to Knoxville to Master woodworkers show.

Posts

Headed to Knoxville to Master woodworkers show.

#1

Headed to Knoxville to Master woodworkers show.

John Lucas

I've been wanting take a longer ride on the motorcycle and there is a Master woodworkers show opening in KNoxville today. I know most of the guys who will be in it and there are some good turners who usually enter. It will be mostly furniture I'm sure. It will be interesting to see who made it this year. I'll report back. It's at the Emporium Center for Arts and culture. Gosh a high class place like that might not even let me in.

It's interesting, as I look down the sponsors there is the Maryville Isshinryu Karate School. I'll be interesting to see the connection there. I studied that style for a short time many years back.

Re: Headed to Knoxville to Master woodworkers show.

#2

Re: Headed to Knoxville to Master woodworkers show

Hal Taylor

John, you going on 40 or the back roads? Your ride I'm sure will be acceptable to the karate folks, but as you say to the "other side"?

Re: Headed to Knoxville to Master woodworkers show.

#3

Re: Headed to Knoxville to Master woodworkers show

John Lucas

I'll probably do a little of both. My bike can handle high way speeds but my windshield isn't tall enough and creates a lot of wind turbulance around my helmut. At 55 and 60 it's relaxing but at 75 and 80 it's a lot of buffeting. I'll probably ride most of the way on 70 and then cut over to I40 for the last 20 miles and eliminate all those traffic lights.

If I head back early I may go through Oak Ridge and take 62 back home most of the way.

Re: Headed to Knoxville to Master woodworkers show.

#4

Re: Headed to Knoxville to Master woodworkers show

clay foster

I saw the exhibition last Friday night. All quality work, leaning to the traditional side of the spectrum of styles. I saw Kim Winkler and Graeme there. She is one of the jurors. You'll enjoy seeing it.

Re: Headed to Knoxville to Master woodworkers show.

#5

Re: Headed to Knoxville to Master woodworkers show

John Lucas

Just got back. 250 miles round trip. The bike runs good. It was a little chilly in the morning and after the sun went down. I'll post a few photos later. My friend Curtiss Buchannan was there and had a lot of chairs to drool over. Don Weber was there demonstrating his spring pole lathe.

My friend Al Hudson was there with his absolutely incredible furniture. Al is a long time amateur woodworker but his pieces are absolutely top of the craft. He is bringing a dresser for me to photograph in the next few weeks. Can't wait.

There wasn't much turning this year (other than Curtiss's windsor chairs of course)

Re: Headed to Knoxville to Master woodworkers show.

#6

Some shots for JL

John Lucas

Curtis Buchannan chairs. Notice the Windsor Desk in the middle.


My friend Al Hudson's desk


Cock Roach table


skull desk

Skull desk detail


Re: Headed to Knoxville to Master woodworkers show.

#7

JL

Re: Some shots for JL

JL

I believe that is his "Philadelphia" style desk. Something like $3500.

I like the Cockroach table - that's clever.

Re: Headed to Knoxville to Master woodworkers show.

#8

Re: Some shots for JL

John Lucas

The guy with the cock roach table had another chair that was incredible. It was sold and already gone but a friend had a photo on his phone. The guy is from India and the chair had legs that looked like the kind of highly decorated clothes they wear. Fantastic painting and carving.