Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Jamieson hollowing system

Posts

Jamieson hollowing system

#1

Jamieson hollowing system

James Pittman

I would like to find someone with a Jamieson setup that would let me try it out. I live in Grottoes, va.24441. I would like to find someone within 100/150 miles Thanks Jim

Re: Jamieson hollowing system

#2

Re: Jamieson hollowing system

John Lucas

Well I'm much to far away but you would be welcome to try mine. To be honest there isn't much trying. They are so simple to use. I had a local turner come over this last weekend to turn a vase for his son. He wanted to turn something about 16" deep. Well he's a new turner and has trouble turning a 6" bowl. I knew it would be easier to cut in at the fat point near the bottom and then hollow both halves.

to make it easier on him I had him cut it into 2 parts. The lower part was about 5" deep and the upper end was probably more like 14". Yea I know I said the over all thing was 16" but now that I think about it, it was closer to 20 with the foot.

Anyway after drilling it as deep as we could with a Forestner bit and then a long 1" twist drill I set up the Jamieson rig. I had things to do that day so I just showed him how to cut across the grain instead of into it and turned him loose. He stops frequently and likes to talk so it took him about 2 hours to hollow it but he did. No mishaps, no real training. It is a very forgiving system.

In reality so are the other systems like this and the articulated arms. What I like about the Jamieson style is there aren't any moving parts to get loose or go bad. Not dissing the others and I'm thinking about going that way myself just because I think it would make a good metal lathe/mill skill building project and storing that style of hollower would be easier. I doubt there is much wear of the joints and should they become loose I'm sure it's quite easy to tighten although I haven't heard of any complaints along this line.

Re: Jamieson hollowing system

#3

Re: Jamieson hollowing system

Barry Irby

I have one that is about five years old and has had very little use. Somehow life keeps interfering with my hollowing. You are welcome to come and try it out. I am in Chester VA, about two hours from you.

Re: Jamieson hollowing system

#4

Re: Jamieson hollowing system

James Pittman

Barry I was in Chester friday this week and I am going to Norfolk, va. this thursday and will be returning on friday . I would love to stop and try it out.

My PH# is 540-421-7341 call me or send me a email with your #and I will call to setup a time that will suit you . Thanks very much Jim

Re: Jamieson hollowing system

#5

Re: Jamieson hollowing system

James Pittman

John thanks for all the good advice and the picture you sent of your tool holder, i'm trying to built me one. I see from some video on youtube that you have a powermatic lathe can you tell me how to find the web site that give tips on powermatic lathe,i have a 4224 Powermatic my self and would like to be come a member. Thanks Jim

Re: Jamieson hollowing system

#6

Dick Hines

Re: Jamieson hollowing system

dick hines

Jim I live in Lanexa, just east of Richmond. I will not be home on Friday though. You may want to check with some one at Central Woodturners. They meet just up the road form you in Crimora. And there is a club in Fincastle. Can't remember their mane though.

Re: Jamieson hollowing system

#7

Re: Jamieson hollowing system

James Pittman

Dick I am going to norfolk on thursday of this week to go to a funeral friday if you would be home on thursday, I could be there anytime after noon,but if that will not work I will try to work something out with Barry. Thanks Jim

Re: Jamieson hollowing system

#8

Re: Jamieson hollowing system

John Veerkamp

google "mustard monster"