Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Stabilizing spalted wood

Posts

Stabilizing spalted wood

#1

Stabilizing spalted wood

Barry Irby

This is actually a flatwork question. >(

My son and I have several spalted maple boards and want to resaw them into panels for some sort of cabinets. So what is the best way to stabilize them? Soak them in thinned lacquer. Minwax Wood Hardener? We are thinking of quarter inch thick panels in frames or doors.

Re: Stabilizing spalted wood

#2

Re: Stabilizing spalted wood

John Veerkamp

Unless the wood is soft & punky, all you need to do is dry them . The spalting fungus can't live in dry wood. If soft, try lacquer as suggested.

Re: Stabilizing spalted wood

#3

Steven Antonucci

Resaw to 1/8" veneer and make plywood


Re: Stabilizing spalted wood

#4

Spalted...

Scott Walton

If the wood isn't to punky, I have had great success with diluted Deft. Soak the wood for several hours until it is saturated and then lay out to dry. Deft really smells but is alot less expensive than Minwax's Wood Hardner!!! A 1:3 dilution is a great starting point and I have used that for 4" and 6" bowl blanks with great success.

Re: Stabilizing spalted wood

#5

Ken Vaughan

Stabilizing spalted wood - Cactus Juice

Ken Vaughan

The Pen Turners are using this product to firm up soft and punky wood.

http://www.turntex.com/index.php?page=shop.product_details&product_id=2132&flypage=flypage.tpl&pop=0&option=com_virtuemart&Itemid=18

Normal process is to use vacuum to assist penetration into the wood; followed by a heat treat to set the resin.

If the wood is punky or has soft spots, this will give you an end result more stable for further working.

Re: Stabilizing spalted wood

#6

Ditto what John said.  I've done it.


Re: Stabilizing spalted wood

#7

Thanks for the help.