Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

More fun in the shop

Posts

More fun in the shop

#1

More fun in the shop

john lucas

I finished this bowl just before the Chat last night. Looking at it through the camera I wish I had made the foot smaller. It's about 5"x5". spalted maple


here are some more mirrors. 2 hackberry and one Red Oak with White oak ring.


Re: More fun in the shop

#2

Re: More fun in the shop

adrien

Stop complaining. That bowl is a beaut!

Re: More fun in the shop

#3

Jesper, Denmark

Re: More fun in the shop

Jesper, Denmark

John, the foot is fine. You don't usually look at it from that camera angle.

Re: More fun in the shop

#4

Re: More fun in the shop

John Lucas

Well I'm going to make another one this weekend if I have time. It will be about the same size and everything but I'm going to change the bead detail. Try for a more rounded look, I think I missed the curve as it goes through the bottom. And I'm going to make a smaller foot. Then I'll shoot them side by side and we'll see.

I'm going on an 8 mile hike tomorrow and have to move a piano on Sunday so I'm not sure when I'll get it done but It shouldn't take more than a couple of hours. I could have turned the last one in about 45 minutes or less but had to keep working on the punky areas. The hollowing was also slow because I was afraid the tenon was punky and didn't want to pop it off the lathe. Because of the shape I couldn't leave the tailstock in place for very long when hollowing the inside so I had to take nice light passes for the rest of the hollowing.

Re: More fun in the shop

#5

Re: More fun in the shop

Fred Bearman

I'm kind of a simple guy, and between the beauty of the wood grain and spalting, and I love that bead, and the overall appearance of the bowl, I frankly don't even notice the foot (apologies to the foot, but it is what it is). I like it, but I'm looking forward to the next one.

Re: More fun in the shop

#6

Re: More fun in the shop

matt overton

I would love to see the two side by side. I think it is fine the way it is, but since you are going to make another one, I am curious. The mirrors are all beautiful. I love the fact that you never make two of them the same. This is hard to do with a form that is so restricted by function.

Re: More fun in the shop

#7

Re: More fun in the shop

Ray Carson - Lawrenceville, NJ

Nice bowl John.

Re: More fun in the shop

#8

Barb Siddiqui

Re: More fun in the shop

Barb Siddiqui

Your spalted maple bowl is terrific. I like the dropped edge above the banded rim. Beautiful! And your mirrors, of course, are always great. Love seeing new designs.

Re: More fun in the shop

#9

Aage Rendalen

Great lines, visually very appealing