Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

On the topic of SRG and faceplate work

Posts

On the topic of SRG and faceplate work

#1

Steven Antonucci

On the topic of SRG and faceplate work

steven antonucci

I know that we have a grinds library, but I wondered if there might be a better solution to the problem? How many of you would be willing to take good quality photos/videos of your grinds and the presentation of them to the work?

I think it would become a valuable asset for the WC community if we posted the grinds and their proper presentation to the wood? I think I use a conventional swept back grind, but I think I do some pretty unconventional things with it. These things work for me, but misinterpretted, probably wouldn't be very useful to others?

Much like Robo's video of the upside down SRG, I plan to show why I grind the way I grind and what I do with the edge that isn't conventional.

Who is with me?

Steve

Re: On the topic of SRG and faceplate work

#2

Re: On the topic of SRG and faceplate work

Henry (Raleigh NC)

I'm with you - although only as a consumer (reader) and not a contributor.

I agree that coupling the grind description and video of how it is used would be very helpful to me as a relative amateur turner.

Henry W

Re: On the topic of SRG and faceplate work

#3

Re: On the topic of SRG and faceplate work

john lucas

Steve I don't know how I would do that. I use all of the edges of my grinds in different ways. Just the spindle gouge which I hope to do a video on in the next few days is use about 4 or 5 different ways.

Re: On the topic of SRG and faceplate work

#4

Lyle Jamieson

Re: AD for DVD

Lyle Jamieson

It takes me 4 hours and twenty minutes to go through the tool control I use with my bowl gouge in my "Bowl Basics the Easy Way" DVD. How can I do it in one Photo?? How much text would I need to explain just one of the four cuts? I have written tool control and preventing catches articles with multiple pages and photos that barely scratched the surface.

Re: On the topic of SRG and faceplate work

#5

Brad Vietje

Re: On the topic of SRG and faceplate work

Brad Vietje

Steven,

I would have to add that the problem with a spindle roughing gouge for faceplate work is due to the tang breaking, not the grind.

Is there a link to Reed's video?

Safe spinning,

Brad Vietje

Newbury, VT

Re: On the topic of SRG and faceplate work

#6

Brad Vietje

Re: On the topic of SRG and faceplate work

Brad Vietje

OK -- I read the earlier posts and found the link from Robo Hippy...

(found here, BTW: http://www.youtube.com/watch?v=OwlAb2BWHw8).

I'm with Robo on this one -- the way the bevel and cutting edge are presented are everything.

For any beginners reading along, the basic fundamentals of presenting the tool to the spinning wood are exactly the same for each (bevel-supported cutting) tool -- only the shape of the tool (flute, bevel, etc...) and the spinning wood changes -- the "rules" stay the same. Scraping tools are fundamentally different than cutting tools, so they are used with different fundamental rules, or guidelines.

The late Kieth Rowley probably laid them out in the most popular and accessible format in Woodturning: A Foundation Course -- a pretty good book for the beginning turner.

Safe spinning,

Brad Vietje

Newbury, VT

Re: On the topic of SRG and faceplate work

#7

Re: On the topic of SRG and faceplate work

John Lucas

Still photos might be able to show how the wood crosses the cutting edge and the angle of the cutting edge. It's hard to show how the bevel is rubbing with any particular cut but perhaps a photo of a cut and then a discussion of the the pros and con's of that particular cut.

We all use so many different cuts but it might be interesting to see how different grinds are used with the same cutting action.