DIY: Elves/spiral decorating tool
mjonesrdg
Various methods for making this type of decorations tools have been cluttering my mind and I just went at making a few. Those shown here all work, but like so many such efforts, I'd do the next one differently.

This shows the assembly of one with a disc magnet sandwiched between a drilled dowel and a blank dowel and encased in a brass tube. A 3/16" brass tube serves as a bushing for the cutter shaft.

I did all the drilling/fitting on the lathe. This is an old brass drift that I haven't used as a brass drift in many years.
A few drops of oil in the bushing created a suction fit (the cutter won't fall out) so I consider the magnet and all that to be redundant. The tubing I got at the local hardware and magnets at harbor freight. The aluminum handpiece shown I removed from it's flex shaft for more maneuverability..but the thought occurred to me to run it with the shaft and back through the motor and maybe generate some electricity 
Now I can go clutter my mind with something else.



