Minimal turning... *LINK*
steven antonucci
technically, I turned all 4 of the tenons on the legs of this shavehorse... Probably needs another day or so of work. based upon Peter Galbert's plans. He's an awesome chairmaker.

Steve
Peter's Website
Knowledge You Can Build On — Est. 1998
Minimal turning... *LINK*
steven antonucci
technically, I turned all 4 of the tenons on the legs of this shavehorse... Probably needs another day or so of work. based upon Peter Galbert's plans. He's an awesome chairmaker.

Steve
Peter's Website
Re: Minimal turning...
John Lucas
Steve When I built mine I left the legs with 1" tenons. thought it was perfect, then I read in some other literature that the legs should be a minimum of 1 1/2. So many years later I made new legs for mine. It's still holding up but it's lonely because it hasn't been used in a while.
Mine were 1 3/8" (largest Forstner bit I own)
steven antonucci
and they are white oak. I doubt you and I could break them together.
I wanted to make them tapered tenons so that they wedge themselves in every time you sit on it, but I couldn't find a tapered reamer anywhere near that size.
I can see chairs in my future
(Right after I make a proper reamer...)
Steve
Re: Mine were 1 3/8" (largest Forstner bit I own)
Clifton C
Steve, I have one I bought and one I made with ideas
from this page; http://www.greenwoodworking.com/SawSteelTaperedReamerPlans
I sacrificed a card scraper for the blade. The one I made
works better then the one I bought, go figger...
cc
Re: Mine were 1 3/8" (largest Forstner bit I own)
John Lucas
I've made 2 of those. They work fantastic. I used key hole saw blades. I taught a class on making tools many years ago and used these for the tapered holes. They work so well if gently insert the leg and give it a twist you can't pull them back out. You need a mallet to tap them out.
I purchased the spoon reamer sold for Windsor chairs and tried an old Bung hole reamer and another odd thing I purchases at the flea mkt. The homemade one works best. And since you build it you can change the taper shape to anything you want.
I always forget this
steven antonucci
Peter Galbert's blog has a wealth of information for anyone looking to build Windsors. I saw this again last night, and since I haven't thought about it in a while, was gently nudged to remember it. (and now again by you guys)
I think that the thing that interests me most about chairmaking is the face that you can put everything you need into a 10'x10' space, and still have room left over. Moreover, if you don't have something you need, you likely have the tools and skills to make one for yourself.
I may just make one of these and hang it so I don't have to remember it again!
Thanks
Steve
Why would someone want to shave a horse?
Scott in Falcon
Sorry, I couldn't help it! 
To get to the other side
Before I got into turning...
Steve Kubien
...I had an interest in chairmaking. If you google "shaving pony" or "shaving mule" you will come up with a plan to make a bench-mounted horse. That is what I used because I didn't have the space for a real one.
I started to make my first chair, needed a turned handle for something or other, bought a lathe and...well...I still have the seat for that first chair. I have since used the rungs and legs for other things. *sigh*
Nowadays I want a shaving horse to aid in spoon and ladle carving. Hmmm, I've got a big hunk of 2x12 in the yard that ought to provide most of the parts....
Re: I think its a scam in the making
Bob Macgregor
Maybe Steve is trying to cash in on the hairless pets craze? Rats, mice, guinea pigs, cats, dogs...and now you, too, can have your own hairless horse!!
BOB