first tool loaded for the move
Carol Reed, Strawberry, AZ
the lathe, of course! That 1642 is HEAVY!
Knowledge You Can Build On — Est. 1998
first tool loaded for the move
Carol Reed, Strawberry, AZ
the lathe, of course! That 1642 is HEAVY!
Re: first tool loaded for the move
John Lucas
Carol When I moved my 3520 I built some rollers out of 2x8's and Pneumatic tires. I was proud of myself. I could roll it around the shop myself. I had borrowed a really nice trailer and even nicer truck from a friend. I had backed it up a slight grade to get to the shop. My friend who was going to help me was late getting there. I had already loaded the washer and dryer and the lathe moved so easily I thought I could load it myself.
I rolled it up the slight ramp, it cleared the ramp, and then took off down the trailer headed for the truck. (did I mention I had to back up a slope) I don't know what made me think I could keep a 750lb lathe from rolling downhill and taking out the back of the truck. I mean I only weigh 164lbs, Anyway it drug me all the way down and somehow I had slowed it enough that the tires just bumped the trailer and stopped. Would have made a funny video.
Should have been the LAST tool....
Rob Wallace
........last-on = first off = more turning time!
(Been there, done that....!)
I hope your move goes well!
Rob
Re: Should have been the LAST tool....
Carol Reed, Strawberry, AZ
The last 'tool' to be loaded is my bed!
Because it NEEDS to be the first off. LOL!
Carol...Are You Leaving Az...?
Wally Dickerman
And where are you heading for?
Re: Carol...Are You Leaving Az...?
Carol Reed, Strawberry, AZ
I am, Wally, for a while. I have taken on a church in Pahrump. NV. It is an interim position and I expect to be there for 15-18 months. Truck comes today. Crazy times.