Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Steve A- here is what we need *LINK*

Posts

Steve A- here is what we need *LINK*

#1

Steve A- here is what we need   *LINK*


http://www.youtube.com/watch?v=sjV9e-Lc4Js&feature=related

Re: Steve A- here is what we need *LINK*

#2

Steven Antonucci

I think it's funny that he's pedalling backwards?

steven antonucci

I think he could pedal normally if he took that twist out of the belt.

Would a Derailleur substitute as a VFD and where would you mount the shifter? (Pedal harder... I need more speed, Captain. I'm givin' 'er all she got!)

I can see mounting the lathe on the handlebars and sending the other guy home too...

Great possibilities.

Steve

Re: Steve A- here is what we need *LINK*

#3

Alan Zenreich

Re: I think it's funny that he's pedalling backwar

Alan Zenreich

He is pedaling backwards because they reversed the seating on the bike and I guess those pedals work only in one directio (probably applies a brake if back pedaled). There are some notes to that effect below the video

Re: Steve A- here is what we need *LINK*

#4

Steven Antonucci

BMX bike with coaster brake

steven antonucci

I didn't see the description, but upon looking at it again, that is a BMX frame, so it likely has the standard coaster brake for skidding and screwing up your back tire. I know a couple of guys in th bike shop that I worked in used to open the hubs and remove the part that locked it. The lazy ones would either weld it or replace it so they do tricks (like ride backwards).

It's been a very long time since I worked in the bike shop, but I've got a lot more tools and mechanical know-how these days. I think I could rig this up with my lathe and my trainer so that I could turn while pedaling... someday, I may just try it.

If I do, I'll be the first guy in a faceshield and bicycle helmet turning in lycra pants...

S

Re: Steve A- here is what we need *LINK*

#5

I want to make an ice cream maker

john lucas

I keep my eyes peeled for the old fashioned hand crank ice cream makers. I'm going to set my bicycle on my trainer and run a spare chain from the free wheel to a sprocket welded to the ice cream maker. About 30 minutes of riding and will have burned enough calories to eat the ice cream.

Re: Steve A- here is what we need *LINK*

#6

Re: I want to make an ice cream maker

Dale Miner

That depends on the size of the bowl.

I have a couple of 5 gallon hand cranked freezers so when you get set up, a can assure you of a workout before the overindulgence.

Re: Steve A- here is what we need *LINK*

#7

Re: I want to make an ice cream maker

Carol Reed, Strawberry, AZ

John, I have always admired you for being teh ultimate multi-tasker, but this is a little over the top, even for you! LOL!

Yet If I had such a thing, I send it to you - and then drop by to help you eat it!

Re: Steve A- here is what we need *LINK*

#8

Re: I want to make an ice cream maker

john lucas

Carol The ultimate way is liquid Nitrogen. Our chemistry students make such a thing and it's fabulous. It has the texture of soft serve but the flavor of real homemade ice cream. It takes about a minute or so to make.

Re: Steve A- here is what we need *LINK*

#9

Steven Antonucci

That would just be an attachment to my pedi-lathe!

steven antonucci

hmm...

if you welded a different gear to either side of the hub, and ran one chain forward to the lathe and another bigger gear to the ice cream maker, you could truly multi-task!

Only issue might be that you'd need to make sure that the ice cream maker was well sealed, or you might end up with shavings in your soft serve!

S

Re: Steve A- here is what we need *LINK*

#10

Re: Steve A- here is what we need

Don Orr

It looked like the lathe was turning the wrong way to me.