Spalted Beech Form
Ronnyeelen
Size of this piece is between 4 and 5 inches high. A small piece of what once was a really big tree (for our measures of course...). Sanded to 400, several coats of lemon oil for finish.
All comments are welcome.
Knowledge You Can Build On — Est. 1998
Spalted Beech Form
Ronnyeelen
Size of this piece is between 4 and 5 inches high. A small piece of what once was a really big tree (for our measures of course...). Sanded to 400, several coats of lemon oil for finish.
All comments are welcome.
Re: Spalted Beech Form
Steve Kubien
Ya know, I really like it. The shape is by different than we are used to seeing, where the mass is 2/3rd's of the way up, hollowed and through a really tiny hole. This makes me want to pick it up.
Thanks for sharing.
Nice shape and wood. Well done.
Re: Spalted Beech Form
Randy Gleckler
Nice job, I too like the shape. I've been playing with a design a little wider at the base, but I like this shape too. Nice work
Re: Spalted Beech Form
ronnyeelen
thanks. Didn't occur to me it was a little bit of an unusual shape. 
Glad you like them anyway.
Ronny
Re: Spalted Beech Form
Rob Wallace
Nice Piece! It still almost exactly follows the "rule of thirds", and as Steve notes, it's inverted from the more usual form with max. diameter 1/3 from the top. Foot diameter ratio also works well. This is a good example of a well-executed form, faired curves, and a pleasing scale, not to mention great piece of wood. The image would be good to add to my demo presentation on "Woodturning Form".
Thanks for sharing this!
Rob
Re: Spalted Beech Form
Hal Taylor
I really like the form too, wood is really pretty as well.
Beaut!!
Re: Spalted Beech Form
Ronnyeelen
Hi Rob,
Please, feel free to use it. If you wish, I can send you a larger file of the picture.
thanks for the nice comments, 
Ronny
Re: Beaut!!
Don Leydens
I really like the shape of this. Well done!