Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Pencil Bowls

Posts

Pencil Bowls

#1

Pencil Bowls

john lucas

Well here they are. I don't really like them but maybe they will serve the purpose of teaching students to cut downhill with the grain. I don't recommend turning these. They were incredibly dirty, I looked like coal minor when I got done. You had to do a final scraper because rubbing the bevel smeared the graphite. You could not sand them. I've put about 4 coats of lacquer on them and they need more. I did sand the lacquer slightly to get rid of some of the nibs sticking up.

The one on the left is an endgrain bowl and the one on the right is a side grain bowl. I think the spindle is actually better at showing what I'm trying to get across.


Re: Pencil Bowls

#2

Re: Pencil Bowls

Scott in Falcon

Sorry they were so hard to turn, but I really like the end grain bowl! I've been talking about doing a similar project myself using colored pencils.

Scott

Re: Pencil Bowls

#3

Steven Antonucci

And the teacher becomes the student

steven antonucci

You probably learned everything you needed to know about turning pencils, huh?

I had a crazy idea in my head, but thatnkfully, you've talked me out of it.

Steve

P.S. you can not turn anthracite coal either DAMHIKT

Re: Pencil Bowls

#4

Re: Pencil Bowls

Randy Gleckler

I think all three are great examples for a visual person who may understand but just not get what's going on. The side grain shows where you have end grain tear out (if you do) and there's many areas you can point to in these. Very very cool John, nice work.

Re: Pencil Bowls

#5

Katherine Kowalski

Re: Pencil Bowls

Katherine Kowalski

John,

These are FABULOUS! Besides being a pretty cool teaching tool, I find myself drawn to the interesting patterns they make -- on all three pieces. They almost remind me of millefiore glass, or candle carving (where they dip the candle 15 times to build up layers, then carve).

I "recognize" pencils in the end grain bowl -- the ones that have one dark side and one light side -- adds a neat variety to the pattern.

It's a shame that they are such a pain to turn -- it would be a very interesting area of design to explore.

Cool stuff.

Katherine

Re: Pencil Bowls

#6

Re: Pencil Bowls *LINK*

Michael Mocho


Hello John

I thought you may have some interest in seeing the work of other makers who work with pencils:

The image is from an exhibition I saw in Philadelphia in 2005 during the TIE retrospective events held in conjunction with the Collectors of Wood Art . I’m sorry I don’t have the maker’s name or other information.

Here is the website of a great turner / artist / teacher at the University of South Carolina named Robert Lyon: http://www.robertflyon.com/

Some of his work incorporates pencils in a variety of approaches. I hope some of these explorations fuel more of your own.

-Michael Mocho

www.mmocho.com


the work of Robert Lyon

Re: Pencil Bowls

#7

here is a pencil box

bob davis


Re: Pencil Bowls

#8

Thanks, way cool, wish I had time to experiment


Re: Pencil Bowls

#9

Now that's more my scale :}


Re: Pencil Bowls

#10

Write On !

Don Orr

These are great John. Really demonstrates grain direction very well.

Re: Pencil Bowls

#11

Don  remind me to shoot for that pun 


Re: Pencil Bowls

#12

Rob Wallace

Re: Pencil Bowls

Rob Wallace

John: Too bad you couldn't make it to the AAW Symposium in St. Paul this past June - there were at least two or three pieces turned from glued-up COLORED pencils on display in the Instant Gallery. I don't have photographs of them to share nor do I know who the turner was that did them, but I am sure that Jeff Schnell's photo montage of the entire Instant Gallery likely has at least 2 or 3 images of these pieces. They were beautiful and very creative!

I like what you've done. I have a question about gluing them together. Did you assemble the blanks by gluing in individual, glue covered pencils until it was all assembled, or did you glue them in a "batch" process? What did you use for clamps while the adhesive was setting?

Thanks for posting these!

Rob