Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

posting fuzzy photos

Posts

posting fuzzy photos

#1

posting fuzzy photos

John Lucas

I know it's hard. My old eyes are having trouble and I misfocus every now and then. However with digital cameras where you can see the image you should take the time to reshoot something and get it sharp enough for us to see.

We often see this in wood ID photos. Sometimes your too close and the camera won't focus that close. Back up. sometimes when you zoom in it reduces the minimum distance the camera will focus, back up or zoom out. Sure it makes the image smaller but at least it's sharp. You may be able to crop the image if your software has that capability. Crop it so it fills the frame and then reduce the size to fit WC.

Camera shake. If you shoot in low light the camera will pick too low a speed and you get camera shake which can look a lot like out of focus. Use more light or activate the flash. If your shooting photos of your piece to share with us, use a tripod. Even using a tripod if it's on carpet and you push the button with your finger you can shake the camera. Use the self timer or use a cable release so the camera is remotely fired.

I hope that helps. It's a pet peeve of mine and I don't want to sound fussy. It just very frustrating when you see a photo that is practically useless for it's intended purpose.

Re: posting fuzzy photos

#2

No mention of Macro?

Keith Newton----Little Rock, Arkansas

John, I am afraid your pro status assumes that those posting fuzzies probably know how to set their cameras to macro, then switch it back when they are done.

If you fall into that category, and don't know the meaning of macro, nor how to set it, the little flower symbol on a button or dial, is for getting in close. Some camera even have super macro, which is a flower with an S on it, which is for getting even closer than macro will focus.

When you finish shooting macro, just press the button again, to go back to distance, or all your distance pics will be fuzzy.

Depth of field gets shallower, the closer you move in, so shooting with a smaller aperture improves that. Smaller Ap means higher number like f8.

Of course, smaller aperture calls for more light, or faster ISO to hand hold, so it can good to bump that up, although going too high gets grainy, but too low gets noisy, so if you don't understand this part, just leave it alone. ISO 80 will give finer resolution when you have plenty of light, but without it, ISO 400 or higher would be better than the blur from camera shake.

Re: posting fuzzy photos

#3

In addition, many digital cameras ......

JamieDonaldson

....now have a video out ability to plug into a TV for viewing images, and I use this function for a focusing/viewing aid when shooting critical work. I have a 19" monitor beside my light enclosure that gives me instant enlarged viewing of the live camera image, much better info than a tiny camera back monitor.

Re: posting fuzzy photos

#4

Katherine Kowalski

I wish WoodCentral...

Katherine Kowalski

... had a "Like" button. Click! :)