Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

turning pencils

Posts

turning pencils

#1

turning pencils

John Lucas

I got the pencils all glued up the other night. That was challenging. They float in epoxy so I had to rig up ways to hold them down while I was trying to pour in more epoxy. Next time (if there is one) I think I'll glue the pencils down with a thin layer. Once that is tacky I'll pour in the rest.

The two bowls glued up pretty well. I don't know about the spindle. I tried to put two lengths in a pvc tube. Worked well when dry, not so well when I poured in some epoxy and then tried to put the pencils in. I'll see how that looks once I turn away the Pvc.

I started turning one bowl. It's challenging, hard epoxy mixed with very soft pencil and even softer lead. I did find that rubbing the bevel smears the lead. OK when your turning the shape but you have to go back and scrape. The new Hunter Hercules did a good job. I mixed it with using the bowl gouge to get the shape optimum and then clean up with the Hercules.

I hope to finish these by the weekend so I'll try to post photos next week.

Re: turning pencils

#2

Mike Stafford

Graphite smear....use a big eraser....LOL!


Re: turning pencils

#3

Re: turning pencils

john lucas

Mike I worked on them more last night. I looked like a coal miner when I got done. My nose was silver even my biceps were graphite colored. I'll have to wipe down the whole shop when I'm done.

You can't sand these pieces. I shear scraped them to get rid of all the drag lines from rubbing the bevel. I put several coats of lacquer on last night. I guess I'll just keep putting lacquer on until I can sand the lacquer because you smear the graphite if you try to sand the unfinished bowl.

Re: turning pencils

#4

Katherine Kowalski

Keep with it...

Katherine Kowalski

... I am following this thread with great interest -- I can't wait to see your finished piece, John.

(I am perpetually interested in "other" materials, both for turning and mixed media work. I'm entertaining myself by attempting to guess what the finished product will look like... :)

Katherine