Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

help with Nova G3

Posts

help with Nova G3

#1

help with Nova G3

Carol Reed

I can't get it open. Even tried some firm hammering.

It is a fairly new chuck. Last used with duckbill jaws to make Christmas Ornaments a couple of months ago. Worked fine then.

Any tips? Take the big C-clip out and let things fall apart? What am I in for here?

Re: help with Nova G3

#2

Re: help with Nova G3

John Veerkamp

Try soaking the whole chuck in some penetrating oil. Sometimes wood sap & gunk gets in the gears and locks up. After it frees up, give it a good cleaning. Relube with fine machine oil, not WD 40.

Re: help with Nova G3

#3

Keith Tompkins

Re: help with Nova G3

Keith Tompkins

Sounds silly, but the Nova chucks have left-hand threads..you may be unintentionally tightening it :\

Re: help with Nova G3

#4

Re: help with Nova G3

Bill Noce in Northeast Ohio

LIke Keith stated the G-3 is tighten to the left.....I put an arrow to the left an wrote the word close by both holes form the wrench.

Re: help with Nova G3

#5

Re: help with Nova G3 *LINK*

Fred Holder

All Nova chucks open and close opposite to all other chucks on the market. However, if there is a problem with the chuck, you might contact the Nova Tool contact for the USA. I've included a link to their contact page.


Nova Tools USA

Re: help with Nova G3

#6

Re: help with Nova G3

Carol Reed, Strawberry, AZ

None of their help links work. They all get an error.

Seems like i read somethng about this a while back. Is contacting Novas

the only fix?

Re: help with Nova G3

#7

Re: help with Nova G3

Carole Valentine

Have you taken it apart yet? If it is like the SN2 it's very easy to take aprt and check out what's going on.

Re: help with Nova G3

#8

Re: help with Nova G3

Carol Reed, Strawberry, AZ

Not yet. I only get to play with turning when all the other chores are done.

I did download an exploded drawing so I have an idea what I am getting into. Has anyone done this before and what they find the problem to be?

Re: help with Nova G3

#9

Harry Robinette

Re: help with Nova G3

harry robinette

Carol

Remove the snap ring.

everything well then be free.

Hold the chuck in your hand jaws toward your palm.BUT keep a hold of the side of the chuck.

Now you can move the ring with the key and see if it just had something jamming it.

If not let it come apart and watch were things go but it's not really hard.

the ring gear has long teeth in a spiral and you have to line up the beginning of the spiral to each jaw as it goes into the body.Start with #1jaw spin the gear so the end of the spiral is just before the jaw opening slide the #1 jaw in and spin the gear the jaw will start to move,Go onto #2 jaw and do the same thing going to each jaw.once all the jaws are in and moving like they should pop the snap ring in.

Hope this helps

Re: help with Nova G3

#10

Re: Nova G3 working

Carol Reed, Strawberry, AZ

Operator error. I was using the wrong key. Mia culpa, but I did learn a thing or three. One is I don't own a snap ring pliers big enough for this snap ring. Good thing or I could have really screwed things up.

The good things was I sorted out all four chucks and now know what goes with what and what doesn't. I need to get into the turning shack more often!

The other thing I learned is that you all are a great help and generous with your advise. Thank you.

Re: help with Nova G3

#11

Phil Stivers

Re: Nova G3 working

Phil Stivers

I liked the thought that you were turning it the wrong way.... I've NEVER done that :-) Glad it's working.