Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Gift boxes for smallish turnings

Posts

Gift boxes for smallish turnings

#1

Gift boxes for smallish turnings

Mike Rubes, Apex, NC

Hi all,

I am making a bunch (around 50) "Harry Potter" type magician wands and want to get a cardboard box to go with them. I am having a tough time finding a box in the size I want. Does anyone know of a custom place that will make boxes to the size I want? I want something about 14" long by 2 " x 1" or heck, even 2x2x14. I can find about a zillion that go up to 10 inches long, but I really want one longer. Basically, a nice cardboard box (2 piece, top bottom) that I could put a sticker on for "Mike's Wand Shop" or something like that. I think the kids would enjoy it.

Any ideas?

Mike

Still looking for the box making spell in Apex, NC...

Re: Gift boxes for smallish turnings

#3

Mike Stafford

Re: Gift boxes for smallish turnings *LINK*

Mike Stafford

Mike, I have been unable to find a normal rectangular box to meet your size requirements.

However a company I have done business with PaperMart has the following options under the category "Tubes".

Triangular tubes 2" on a side and 18" long. Item # 084218

Five panel folding tube boxes 2" square and 18" long. Item #08515

There may be other options but this is what I could find quickly.


Paper Mart

Re: Gift boxes for smallish turnings

#4

Re: Gift boxes for smallish turnings

Barry Irby

How about a tube? Surely somebody makes a tube you could use.

Or Make your own. Two pieces of wood with a cove routed into each and a set of cheap hinges or leather for a hinge.

Re: Gift boxes for smallish turnings

#5

Re: Gift boxes for smallish turnings

Mike Rubes, Apex, NC

Thanks, guys. I am sure that there is something here I can use.

Mike

Re: Gift boxes for smallish turnings

#6

Joe Bradshaw

Re: Gift boxes for smallish turnings

Joe Bradshaw

Mike, check out Uline.com. Their item #S15102 is close to what you are looking for.

Re: Gift boxes for smallish turnings

#7

Re: Drafting Supply

Steve Criscenzo

Mike

Try a drafting supply store. They sell tubes for design drawings. They may be long but you can probably cut them in half to get two out of each one.

Re: Gift boxes for smallish turnings

#8

Found one! *LINK*

Mike Rubes, Apex, NC

Thanks for all the suggestions. For those that might need something like this, I finally found what I wanted at a Coin/Stamp supply store.

http://www.brooklyngallery.com/cgi-bin/commerce.exe?preadd=action&key=0023-710

They are not super cheap, but for 50 it works out to just over $2 a box, which is not too bad.

Thanks again,

Mike


Wand Box