pendant findings
Darrin Hill
been trying to make a few pendants for family and they complain that the findings tend to pop off... im using carnuba wax as a finish.. dont know if the wax does not allow the ca to attach to the wood...
any ideas?
Knowledge You Can Build On — Est. 1998
pendant findings
Darrin Hill
been trying to make a few pendants for family and they complain that the findings tend to pop off... im using carnuba wax as a finish.. dont know if the wax does not allow the ca to attach to the wood...
any ideas?
Re: pendant findings
John Lucas
Clean the back with mineral spirits to get rid of any wax. I use epoxy. I sometimes scratch the area where the pendant is glued to give the epoxy a better tooth to bit into. I also scratch the back of the finding as well. I use a sharp scratch awl to scratch the surface
Re: pendant findings
Alan Zenreich
Darren,
What kind of findings are you using that require gluing?
Most versions that we use pass through, or are screwed or glued inti holes bored into the pendant.
Rio Grande Jewelry Supply *LINK*
Jennifer Indy.USA
Darrin, check out Rio Grande. They have tons of stuff for jewelry making. I've had good success with these pinch bails.
Rio Grande Pinch Bails