Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Jet -vs- Grizzly????

Posts

Jet -vs- Grizzly????

#1

Jet -vs- Grizzly????

Shawn Dakin

I am wanting to purchase a full size lathe(currently have a mini) and i keep hearing about the Jet 1442 and how it is a good low end full size lathe. Grizzly has a GO462 that looks like the Jet. I cant find any feedback on the Grizzly and am wanting to know if any of you has one or knows someone who does. It is almost $800.00 less than the Jet. But is it worth it?????

Re: Jet -vs- Grizzly????

#2

Re: Jet -vs- Grizzly????

Bart Leetch

Wouldn't touch either one of them they both have a reeves drive system which limits you on your low speed end. Save your money & wait until you can afford a variable frequency drive system like the Delta 46-460.

http://www.amazon.com/s/?ie=UTF8&keywords=delta+46-460&tag=googhydr-20&index=aps&hvadid=12856618429&ref=pd_sl_69vgmdopg6_e

Or the Jet 16 x 42

http://www.amazon.com/s/?ie=UTF8&node=552832&keywords=jet+lathe+1442&tag=googhydr-20&hvadid=3667674085&ref=pd_sl_32yfbczy20_b

But as long as your spending 1300 +/_ dollars on the Jet why not get this one?

http://www.grizzly.com/products/18-X-47-Wood-Lathe/G0698

Personally I'm tired of messing around the Grizzly 18x47 is at a great price point & is 2504.99 less then th PM3520B It turns 2" less over the bed but both can turn off the end of the bed, both are 2 HP.

If you can't handle the 220 volt I would go with the Jet 1642 1 1/2 hp lathe, or the Delta 12 1/2" 46-460.

Re: Jet -vs- Grizzly????

#3

JL

Re: Jet -vs- Grizzly????

JL

Like Bart, I wouldn't get a Reeves drive. My first lathe was a Reeves drive - I'm glad I got rid of it and "graduate" to an electronic variable speed lathe.

I have a Jet 1642 EVS. I'm quite happy with it. You could also look at the Grizzly EVS lathes G0698 or whatever.

Re: Jet -vs- Grizzly????

#4

Re: Jet -vs- Grizzly????

Greg Haugen

I agree with what has been said. I do not like Reeves drives. Personally, I'd get the new Delta 12" lathe before I'd jet a 14" reeves drive lathe. My first lathe was the Delta Iron, 14", Reeves drive. I felt like a "upgraded" when I sold it and bought a jet mini VS with a stand. I know have a Jet 1642 EVS and have been quite happy with it.

If cost is a factor but you want some more power and swing, look at the Nova 1624. I'd rather change a belt than listen to a Reeves.

"You only cry once when you buy a more expensive tool. You'll cry every time you use a cheap tool."

Re: Jet -vs- Grizzly????

#5

Re: Jet -vs- Grizzly????

Roger Chandler

I have the Grizzly G0698...........over a year and a half of usage.........the lathe so far has not had one single issue, has performed superbly, and has met every expectation I had. I have turned on two different Pm3520b's and while they are heavier, and the banjo is better, the G0698 18x47 has performed on a par with the 3520b.........it also has the identical toolrest as the Jet 1642 evs.

A 2hp motor, 3 phase inverter that runs off single phase power, and has reversing and variable speed control...........very similar in setup to the PM3520b and Jet 1642 evs. I am confident there is some connection in manufacturing with the Grizz G0698 and those two units.

My experience has been a very good one.........probably not a better lathe with the features for the price on the market at present. I post this in hopes of being helpful to you...........not trying to sell you on the Grizzly or any other brand.........good luck with what ever your choice is.

Re: Jet -vs- Grizzly????

#6

I will never buy Grizzly again, go Jet


Re: Jet -vs- Grizzly????

#7

Re: Jet -vs- Grizzly????

John Veerkamp

Shawn,

Where are you located. I moved up to a PM 3520 and have my Delta 16" VS lathe for sale. It has a new electronic controller and is now 220. I'll make you a good offer if you're interested. I live near Kansas City and can deliver within a reasonable distance. Shipping is not feasible.

E-mail me if you want more info.

John

Re: Jet -vs- Grizzly????

#8

Richard Allen

(Message Deleted by Poster)


Re: Jet -vs- Grizzly????

#9

Re: Jet -vs- Grizzly????

Roger Chandler

In my opinion, Grizzly has 3 good models........the G0698, the G0694, and the G0632.....these are considered the large size lathes..........some of the others, I would stay away from as well, but these 3 models are the upper end of their lathe lineup.

I know of some guys that have the mini lathes from Grizzly, and like them okay.

Re: Jet -vs- Grizzly????

#10

Re: Jet -vs- Grizzly????

Jerry Klug

I used to live "across town" from Grizzly so I was in their showroom occasionally. I ended up buying a few of their machines when starting out in woodworking. I didn't get into turning until after I moved a few hundred miles south. My first encounter with a good turning teacher told me to buy the best lathe I could afford so I could limit the costs of continually moving up in turning capacity. After my experience with the Grizzly machines I had, I would not consider them for a lathe. Grizzly may make import a good model or two but I found that jet/powermatic to be MUCH, MUCH better at customer support. After table saw arbor bearing seizures , warped cast iron that required re-machining, flimsy disc sander table supports that flex and cannot maintain position and slow or non existant support from Grizly, I will look for service record ahead of features when comparing any tool.

Re: Jet -vs- Grizzly????

#11

Leo Cuellar

Re: Jet -vs- Grizzly????

Leo Cuellar

I have a G0462, while it wasn't a bad lathe, at the minimum you want to get something with electronic variable speed. The minimum speed of this machine is just over 500rpm which is way to fast for effective sanding & thread chasing and lots of other things that you might want to do.

I have since upgraded to a G0698, which has EVS. I was fortunate to find one at the tent sale at almost $600 of normal retail. It has much wider bed ways & a wider stance on the floor which are important for controlling vibration.

Re: Jet -vs- Grizzly????

#12

Lyle Jamieson

Re: Jet -vs- Grizzly????

Lyle Jamieson

Warning, you get what you pay for. The fit, finish, quality of parts used, service, and engineering are all better as you move up in price. The mini lathes are OK but the limitations of scale would be frustrating for some. Did I say, you get what you pay for in the lathe marketplace??

Re: Jet -vs- Grizzly????

#13

Brad Vietje

YES -- Maybe 1200 Less.

Brad Vietje

SO, that's a hard question to answer!

Did you mean "Is the Jet worth $800 MORE? (Yes -- probably)

-- or--

"Is the Grizzly worth $800 LESS?"... I'd say it was worth less than that -- maybe a lot less.

As Lyle points out, you get what you pay for sometimes. If you have a little time, and you really want a full-size lathe, consider a used Powermatic-90. Put a variable speed motor on it, and you might get twice the lathe for half the money. If you need more swing, riser blocks can also be made. Or get a PM3520B.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Jet -vs- Grizzly????

#14

Tool brand attitudes (Ya think)

Bart Leetch

I have a combination of different brands of tools in my shop equipment. Delta, Jet, Davis Wells, Dewalt, Grizzly & Craftsman. If you pick & choose you can still have some pretty good tools in all these name brands. Maybe I've mellowed with age but I hate all this garbage of I wouldn't have this or that tool especially when I've run across old prejudice about tool company's from back when they started out & their product line wasn't up to par, or they ran into personal conflicts with people that didn't know how to perform customer service. I am not a brand oriented tool person so I pick & choose & try to stay informed as I look for a certain tool. When I run across a post in no uncertain terms putting down a brand I read it & do my own research other than that I ignore it because I have found in most cases the person has been worrying this bone for a long time & will continue to do so.

I have already stated that I intend to buy the Grizzly G0698, this is a lathe the Laguna sells a copy of also they have had their share of problems with it too from what I've read on the web would that stop me from buying a band-saw from them probably not... would price probably. Busy Bee tools also sells a copy of this lathe as does a retailer in Australia. Wouldn't you think the basic lathe is made in the same factory & the problem has been mostly the electronics with 2 of the re-sellers the basic lathe is pretty much ok & the electronics seem to have gotten straightened out. This shows a progression of having a problem & the effort to correct it. Electronics in tools of these values is a recent last few year's kind of thing & will improve with time. So I say pick you own battles don't dictate other peoples battles. For goodness sake lay that bone down & let the dog gnaw on it for awhile, when you go to gnaw on it again you'll find it will leave just as bad of a taste in your mouth as it does in others when they hear you gnawing on it.

Re: Jet -vs- Grizzly????

#15

Lyle Jamieson

Re: Tool brand attitudes (Ya think)

Lyle Jamieson

I dont know if your hostility is directed at me or not. I did not mention any brands at all. Do you think two lathes that cost $800-1,000 different from one another will be the same quality or have the same features??

Re: Jet -vs- Grizzly????

#16

Re: YES -- Maybe 1200 Less.

Roger Chandler

I can tell you this........for a fact! The Jet 1642 evs is a nice lathe..........the Grizzly G0698 is a nice lathe as well, and has more swing and distance between centers. Several of my friends have the Jet 1642 evs, and some of them have the PM 3520b.............my Grizz performs on a par with either of them............

The fit and finish on the PM3520b is better than the Grizzly G0698, and the Jet is similar in my opinion on finish........I been up close and personal with both models. The Jet has a handwheel, the Grizz does not, but I have not needed one...........

If I decided to afford it, I would probably go with the Robust American Beauty.........but until I ever get to the point I am willing to go there...........the Grizzly G0698 will do whatever I need it to. So far the performance has been superb!

Re: Jet -vs- Grizzly????

#17

Re: Tool brand attitudes (Ya think)

Bart Leetch

The written word leaves a lot to be desired, I read this to the LOML before I hit send & she knew I had no hostility toward anyone.

Do you think two lathes that cost $800-1,000 different from one another will be the same quality or have the same features??

N0 the quality & size of the gap in price depends on the models & sizes of lathe as well as features & the seller or if they are direct import seller or a regular retailer. I would never compare the PM to say a mini or midi lathe or some of the other lathes mentioned.

But the PM 3520 Jet 1642 & the Grizzly G0693 all fit with in an exclusive area together even if they are not exactly the same I.E. power 2 HP, swing 16", 18", 20", length, ability to slide the head & turn at the end of the bed. Then again maybe not. I think it may depend more on the person & their opinions. I do seriously doubt that the Jet 1642-2 is worth $704.99 more than the Grizzly G0698 $1395.00 remember Grizzly isn't a retailer but is a direct importer. I actually think the Grizzly it would be worth more in a retail situation than the Jet because it is a bigger heavier machine as well as the swing size is bigger. But all of this will be reviewed in the future when we see after a few years how the G0698 stacks up against the Jet.

I do know that the Grizzly G0698 is $2504.99 less than the PM which by the way I would love to have but it is just not a wise purchase for me for only hobby work when the Grizzly will do everything I want it to do. You know I could buy a lot of turning wood with that $2504.99 and have a lot of fun & that is what it is about for me. I am not very knowledgeable about these things & I am quite sure you know more about it than I do.

I am saying that people tend to have their likes & dislikes & I used to come on in a manner that was meant to be confrontational about 1 tool over another but have found that many brands of tools will do the same job & not everyone needs or can afford the same price point in tool quality. I'll give you an example my Dad used almost exclusively Craftsman tools purchased from the 50's through the mid 60's & built custom cabinets & custom homes a few apt. complexes & restaurants & a school or 2. This was in a time when he started out & where he lived if you found a Delta Unisaw as well as other types of bigger heavier equipment you paid a high price to purchase them. Also the need to purchase several types of tools over a short few years meant purchasing high dollar tools wasn't the way to go. All those tools still work I have them now. Yes I do know Craftsman went through a phase where the bean counters pretty much destroyed their reputation. They seem to have a few tools that are better then they were now.

Re: Jet -vs- Grizzly????

#18

Brad Vietje

Re: YES -- Maybe 1200 Less.

Brad Vietje

Well, there you have it.

I'm still an old curmudgeon who wants to restore old cast iron, and sometimes the old beasts are well worth the makeover.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Jet -vs- Grizzly????

#19

Re: YES -- Maybe 1200 Less.

Bart Leetch

Well, there you have it.

I'm still an old curmudgeon who wants to restore old cast iron, and sometimes the old beasts are well worth the makeover.

Safe spinning,

Brad Vietje

Newbury, VT

I have given this thought & would do so but have not found an older lathe at a price point that fits my budget & turns larger then 12". The thought has occurred to me to buy an older lathe that turns outboard & mount it on some I beam with spacers & use the I beam as the lathe bed to mount a banjo on say from Oneway for outboard turning up to 24".