Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Pulsating bandsaw blade:What's happening?

Posts

Pulsating bandsaw blade:What's happening?

#1

Aage Rendalen

Pulsating bandsaw blade:What's happening?

Aage Rendalen

I put on a new bandsaw blade yesterday. When I tightened it and turned it on, it began rocking back and forth a few millimeters. I've had this happen before, too. These are blades that are welded locally. Is it the blade that's at fault or my wheels?

Re: Pulsating bandsaw blade:What's happening?

#2

Re: Pulsating bandsaw blade:What's happening?

Bart Leetch

If It hasn't done this before my guess would be that the ends of the weld joint were not ground square up before they welded it.

Re: Pulsating bandsaw blade:What's happening?

#3

Re: Pulsating bandsaw blade:What's happening?

Bart Leetch

I forgot line the blade up along the back side where the weld is with a known straight edge you'll see real quick if it's straight.

Also look at the joint to make sure it's ground smooth.