Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

anchorseal

Posts

anchorseal

#1

anchorseal

Leroy

Where can I purchase anchorseal at?

Re: anchorseal

#2

Brian McKearney

Re: anchorseal

Brian McKearney

I buy mine from Woodcraft or Amazon (free shipping if you combine with something else and it's actually sold by Woodcraft).

Brian

Re: anchorseal

#3

Re: anchorseal

Greg Haugen

There are tons of places that carry anchorseal. The problem is partly many rename it as their store's "end grain sealer" or "wood sealer". All of the turning catalog sell it as well most woodworking stores. You can also order direct on the UC Coatings website's web store. Like any anything, the more you buy the better the price. I usually buy a 5 gallon bucket, sell a couple of gallons to turners in our local club and keep the rest. It's a win-win for everyone. Depending on where you are, their shipping is often free.

Re: anchorseal

#4

Make sure you......

Richard Jones

ask for the "original" A/S. I order direct from

http://www.uccoatings.com/

about $80, shipped. Last time I called and asked for the original, the sales rep asked "oh, the woodturning recipe, huh?"

I haven't heard great things about the "new and improved" version, though I haven't used it myself.

Rich

Re: anchorseal

#5

Bill Blasic

Re: Make sure you......

Bill Blasic

I have had no problem with the new recipe. Works as well as the original for me.

Bill

Re: anchorseal

#6

Re: Make sure you......

Dale Bonertz

It seems to work as well but be careful of it hardening. I have lost around fifteen to twenty gallons so far. Let me explain. Our club buys the 55 gallon drums where I purchase 5 to 10 gallons at a time. I use cleaned out 5 gallon pales that the original anchor seal comes in and reseal with there caps and also 3 gallon pales with a rubber seal around the rim. The stuff that went bad turned to a marshmallow type consistency. The only thing that I can figure, so far, is that the new version separates in the drum. Being large and heavy it is hard to keep it mixed properly (assuming it is separating). Our club is ordering a new barrel and I think that I have convinced them to order the original or wood turner formula.

If you use the new formula and it does not dry clear then get new stuff. I lost about 100 bowl blanks because I used the new formula that must have been going bad. I noticed that it did not dry clear but rather more whitish on this batch. Loaded the kiln and lost most all of them. IMO the old formula was less hassle and much more predictable.

Dale