Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Old Finish

Posts

Old Finish

#1

Old Finish

jake Niedling

I use a number of products, but use wipe-on poly for a major of my items. I had been unhappy with it the last couple of times I used it, just not getting the smooth finish I normally get. Well, my brain finally engage and said " maybe you need a new pint of finish". It was certainly right. I bought a new can and it made a huge difference. I guess over the course of the year when you use it every week-end or two, you just don't notice it changing and getting a little thicker. So the old can was disposed and replaced. Things should be happier now in the shop.

Re: Old Finish

#2

Re: Old Finish

Chuck Bjorgen

I had a similar experience with an old can of Watco's Danish Oil the past couple weeks. Seemed to take forever to cure and I knew the can had been opened at least six or more years ago. Picked up a new can last week and applied a fresh coat over a couple of pieces this morning and it is curing well. Lesson learned.

Re: Old Finish

#3

Re: Old Finish

John Lucas

Jake I threw mine out yesterday. I don't seem to get the life out of it anymore. I wonder if they changed it. It starts to thicken after just a few months. I thin it with mineral spirits for a while but then it just doesn't dry as smooth. What I pulled out this morning was totally useless.