Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Nova 3000 motor mounting

Posts

Nova 3000 motor mounting

#1

Nova 3000 motor mounting

Starry S Chan

This posting is for Steven Antonucci. Unfortunately, I cannot send PM to members on this forum.

I also have a Nova 3000. I saw the photo of your lathe and I am very curious how you mount your motor for your lathe. The lathe seems to be at the corner of your workshop. Normally, the motor for the Nova 3000 is hung at that corner.

My e-mail is starry12675ATgmailDOTcom. If you are willing to discuss this, please send me an e-mail.

Thanks,

Starry Chan

Re: Nova 3000 motor mounting

#2

Steven Antonucci

Nothing special?

steven antonucci

My lathe has the standard Nova 3000 Motor Mount assembly that it came with?

It is about 24" from the wall, and 12" from the garage door. I have to open the door to duck around back of it.


You can see the motor behind the bowl on the right in this picture. I have a little magnetic bowl on it to hold stuff, but other than that, it's a bone stock Nova 3000.

Steve

Re: Nova 3000 motor mounting

#3

Re: Nova 3000 motor mounting

Fred Holder

Hello Starry,

I hope you got it. I just sent you a 3 page story on the Nova 3000 that I had in 1999 to your e-mail address. I've since replaced it with a NOVA DVR 3000. It was an excellent lathe.

Re: Nova 3000 motor mounting

#4

Re: Nova 3000 motor mounting

Don Evans

Starry

Steve's Nova is a DC motor that is variable controlled with the standard pulley system inside and the motor is also variable.

I wonder if you have the same pulley system but with the non variable AC motor that was also available on Nova 3000's before they came out with the DVR model.

Perhaps DC motor verse AC motor is the difference in Steve's and your lathes?

Don

Re: Nova 3000 motor mounting

#5

Steven Antonucci

Mine is a standard AC motor

steven antonucci

Not DC, but correct on the belts for speed change. No knobs...8 steps for variable speed. No circuitry to blow out either :)

S