Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

My entry for the NJW Challenge(r)

Posts

My entry for the NJW Challenge(r)

#1

Steven Antonucci

My entry for the NJW Challenge(r)

Steven Antonucci

Since most of you are not members of the NJ Woodturners, I figured it would be OK to post my finished project here before tonight's meeting.

The challenge was "Out of this world" and I suppose you could interpret that in many ways... I chose space-themed. Our quest to get to outerspace has always been fascinating to me personally, and I had this idea for a while, so the two just fit together naturally and I decided to make this box for the club challenge.

One of the concepts that Ed Holzli (the organizer) and I discussed was that a lot of members only do one thing and rarely stretch their abilities, so I decided to also stretch my own. As discussed in a prior post, I needed to not only fit the legs to the body, but also devise a way of locating all of the holes accurately. Making two curves identical is even harder than it looks, and I will likely think about this some more for some other ideas that I have.

I also learned a great deal about oil paints... which is to say that I knew nothing about oil paint beforehand. I also developed a great respect for those who can paint, as I am not one of you.

Anyhow, here it is:


I decided that an Americana themed box would make it over the top. I will probably have to make 2 more variations that I entertained during the design process...two more chances to get better at it.

comments always welcome.

Steve

Re: My entry for the NJW Challenge(r)

#2

Keith Tompkins

Re: My entry for the NJW Challenge(r)

Keith Tompkins

Hey Steve, I think it's very cool....VERY cool! What kid wouldn't want that sitting on his dresser?

Re: My entry for the NJW Challenge(r)

#3

Alan Zenreich

Re: My entry for the NJW Challenge(r)

Alan Zenreich

Lauren and I enjoyed this evening's meeting.

We joined this club only a couple of months ago, and tonight was the first time most of the club got to see any of our work.

Lauren made a necklace that has a buckeye burl pendant, and wire work of Argentium spirals and fitted with a few hematite stones. I haven't photographed it yet... have to clear off the table saw... cough... photography table and set up the tent.

I did make a couple of very quick photos of my challenge piece.

My submission is this 1.25" planet made of buckeye burl with articulated rings of cherry burl. The largest ring is 3" in diameter. An interesting project... my first turned sphere. The pins that allow the rings to be positioned are .025" thick, so that involved boring some pretty tiny holes.

The planet balances atop a 1/8" x 12" black rod with a tiny turned cup at the top.

We had fun making our pieces, and by coincidence today is our 37th wedding anniversary... so we brought cupcakes for the club member to nibble on during the break.

Sounds like a pretty romantic evening to me!



Re: My entry for the NJW Challenge(r)

#4

To infinity and beyond!!


Re: My entry for the NJW Challenge(r)

#5

Re: My entry for the NJW Challenge(r)

Randy Gleckler

That is amazing. Very cool.

Re: My entry for the NJW Challenge(r)

#6

Re: My entry for the NJW Challenge(r)

Randy Gleckler

That is cool, Glad you figured out how to put the wing on Steve.

Re: My entry for the NJW Challenge(r)

#7

Definitely "Out of This World" & well done.


Re: My entry for the NJW Challenge(r)

#8

Alan Zenreich

Re: My entry for the NJW Challenge(r)

Alan Zenreich

Here's Lauren's submission... her sort of deconstructed 'Starry Night'

The buckeye burl pendant is about 1.5" wide. The wirework is Argentium silver (non tarnishing), that she work-hardened/flattened with a hammer. The stones in the center of the spirals are hematite, and there's a crystal hanging below the pendant.

Lauren might chime in later with additional details. She requested that I photograph the piece head on to show the asymmetry of the design.

A nice surprise: On two separate occasions, members came up to her quietly and asked "is it for sale, and how much for a club member?". Now that I have a photo of the piece, we'll send it to the members who will see if it's something their wives might want. In any event, it was a nice compliment and commentary on her work.


Re: My entry for the NJW Challenge(r)

#9

Leo Cuellar

Buck Rogers would be proud!

Leo Cuellar

To fly in a ship like that, Steve. Great job!

Re: My entry for the NJW Challenge(r)

#10

Alan Zenreich

Planet step by step video slide show *LINK*

Alan Zenreich

Here's a video slide show of the planet construction.

It's likely best displayed full screen in the YouTube viewer, but let's see how it displays here.

I hope you find it entertaining


Video slide show of planet step-by-step