Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

bowl turning books

Posts

bowl turning books

#1

bowl turning books

Leroy

What books do you recommend for bowl turning from green wood to finish?

Re: bowl turning books

#2

Re: bowl turning books

john lucas

It's hard to learn from a book. I would suggest Bill Grumbine's video. It covers everything from cutting the blank to finishing. When you can actually see the gouge cutting and listen to Bill's explanation you will learn so much more than looking at photos. You can get it at Amazon.com, Woodcraft.com and I'm sure just about any other wood turning supply house.

Re: bowl turning books

#3

There are many

Don Orr

"Ellsworth on Woodturning" and several of Richard Raffan's books are all very good. Keith Rowley's "Foundation Course in Woodturning" is one of the best all around books. Michael O'Donnell's "Turning Green Wood" is a standard.

There are others as well.

Available at Amazon via Woodcentral.

Re: bowl turning books

#4

Re: There are many

Bernie Weishapl

I agree with Don that this book by Keith Rowley's "Foundation Course in Woodturning" was the first book I got when I started turning. The next purchase was Bill's DVD "Turned Bowls Made Easy" and it by far was about the best DVD for learning to turn. He explains most everything from cutting blanks to the finished bowl in detail.

Re: bowl turning books

#5

Re: bowl turning books

Dave Long

A book worth reading is "To Turn the Perfect Wooden Bowl: The Lifelong Quest of Bob Stocksdale. " Bob laid the foundation for a lot of what is taught today when he was turning bowls in the 50s and 60s. Lots of great information and a good read. Woodcraft stores usually carry it or you get used copies on Amazon for under $20.

Bob's pieces are still the standard by which many of today's best bowl turners judge their work.