Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

This is something we would kill for

Posts

This is something we would kill for

#1

This is something we would kill for

john lucas

My friend William Kooeinga brought this carving over yesterday for me to shoot. It is a walnut burl about 24x24x30. It was very heavy. I tried to get this burl from another friend several years ago but he didn't want to sell it. apparently he decided he would and William got it.

It was very glossy and hard to control the reflections even using polarized lights.


Re: This is something we would kill for

#2

Re: This is something we would kill for

avalon

large even for a portrait size..

dean collins showed me my favorite, if not very cumbersom, way of shooting large commercial..

take two 4x8 foam core, put them mostly parallet to the camera ... put two lights behind subject, aim lights with tight grids to foam core, let light bounce back... very seldom had specular highlight reflections even on glass... sometimes you could see the reflectors very very lightly, but were not detractful...

Re: This is something we would kill for

#3

Re: This is something we would kill for

john lucas

Doesn't work on these. you see the foam core as big white reflections in the piece. I have large white Panels and have even hung 9 foot white background paper to shoot some pieces but not this one. You can see the reflections of the background paper. I had black cloth laying everywhere I could outside the photo area to get rid of the reflections on the bottom side of all the curves and you can still see the paper that was not covered. I had 2 hard lights with polarizers. Even then the light would reflect off some areas and not polarize in the same way.

Soft boxes were totally out, they showed up as big squares or rectangles. I have a few shots with no reflections but they look too flat.

Re: This is something we would kill for

#4

Re: This is something we would kill for

Doug Trembath

I think the way you have highlights showing helps to demonstrate the depth and quality of the finish, and relative gloss level, John. I like the pic, but REALLY like the piece.

I have a Walnut burl from California that has some of the most beautiful grain that I have ever seen. Quilted and vari-colored. I have had it for about twelve years, and have been deciding what to do with it. Something like this might work. Thanks for the inspiration!

Doug Trembath

Re: This is something we would kill for

#5

This burl came from California

John Lucas