Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

What do you do with a badly cracked,

Posts

What do you do with a badly cracked,

#1

Dennis in Southern Oregon

What do you do with a badly cracked,

Dennis in Southern Oregon

slightly punky odd-shaped offcut of myrtle burl? The correct answer, of course, is "toss it into the burn pile". This scrap was what was left after getting several nice turnings out of a big chunk of burl that had been rotting in a friend's yard, and it pleaded with me to give it a chance. I thought, what the heck, I can throw it into the burn pile later if I want.

Dennis


Re: What do you do with a badly cracked,

#2

Re: What do you do with a badly cracked,

marvin ewing

You are very,very lucky that a bark inclusion like that didn't come apart during turning. My thought anymore is a John Jordan quote, "Life's too short to turn crappy wood." Remember the lady in Memphis, Tenn.

Re: What do you do with a badly cracked,

#3

Re: What do you do with a badly cracked,

Doug Trembath

Is that Myrtle, Dennis? Looks a bit more like Madrone, on my screen. I like it, anyway. The inclusion isn't radical enough, in my opinion, to worry too much about. Nice job, and it saves one from the burn pile.

Doug Trembath

Re: What do you do with a badly cracked,

#4

Re: What do you do with a badly cracked,

robo hippy

Looks like it is already turned and finished. If I wanted it solid, I would have filled the cracks with medium CA glue, and some walnut dust, then finish turned and sanded, and finished. If you really want the CA to penetrate and fill, you have to do it in phases, a little at a time as a lot of it will shrink as it cures, and leave voids, or the outside will cure, while the inside is still wet, and you will get it all over you as your turn.

robo hippy

Re: What do you do with a badly cracked,

#5

Dennis in Southern Oregon

Re: What do you do with a badly cracked,

Dennis in Southern Oregon

Thanks Doug. Yes, it is myrtle burl that has been on the ground for quite a while and is partially spalted. This burl is the most abrasive piece of wood that I have ever worked with. About two passes would dull my Thompson gouges.

Regarding safety: The piece was more solid than it looks in the picture; the cracks go down only about a third of the way into the piece. Even so, I stood completely out of the line of fire while turning it.

Dennis

Re: What do you do with a badly cracked,

#6

d onot do anything!!

bob davis

Re: What do you do with a badly cracked,

#7

Re: What do you do with a badly cracked,

Mike Rubes, Apex, NC

Hi Dennis,

I like this one a lot. I normally like the symmetrical ones better, but something about this one I like. I really like the edge treatment and how it makes the whole piece look substantial.

Thanks for the pics, that's a great piece.

Mike

Thinking outside the round in Apex, NC....

Re: What do you do with a badly cracked,

#8

Steve Kubien

Re: What do you do with a badly cracked,

Steve Kubien

You have just given me inspiration for a piece of crotch cherry I under buried in my shop. Love it!