Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Shop organization question

Posts

Shop organization question

#1

Steven Antonucci

Shop organization question

steven antonucci

A lot of folks have just posted pictures of their "messy" shops. A common comment was "I don't have enough space". I saw a lot of space and organizational problems in the photos and I disagree. I think most people have all of the space they need.

However, I will admit that I have too much stuff in my shop. Stuff that I don't use in places that I should have other stuff. Stuff that I'll never use that I should just part with. Stuff that I don't even know what it is. In addition to all of this stuff, I built my shop many years ago to accomodate things I rarely do these days- so my shop is built for a former version of me. It was built to store a lot of flat stock, and if it were an empty space that I was moving into, I would never build it the way it is built today!

I've slowly been replanning it to better fit what I do these days, but the reality is that it is a major project (days, perhaps a week or more) to retrofit it into something that fits me today. Who knows what I'll be doing 10 years from now? I may have to move to Version 5.0 by then...

So how many of you live with what you have, and not what you need?

Steve

Re: Shop organization question

#2

Re: Shop organization question

Peter Hyde

Steve, don't do it!!!!!

You will never be able to find anything thereafter. 8) DAMHIKT

Re: Shop organization question

#3

Re: Shop organization question

Ed Moore in SW VA

Steve,

Back when I was having chemo and radiation I agreed to let SMLW use my shop for a Nick Cook workshop. The agreement was that the club members would have to clean the shop because I lacked the strength and energy to do it. They did a super job - and I am still hoping to find some things that they carefully put away for me. :D :D

One of the club members sawed up some ambrosia maple for the workshop and it never got used - and it is now past its prime. We have been having a 14 year old boy do yardwork for us and yesterday was his last day. His last chore was to carry out that ambrosia maple and put it in the John Deere trailer. I took it to a neighbor's firewood pile. I was unable to carry it out myself because it was ambrosia maple and I just might ... . But I was able to let him do that. :D :D

I find that accumulated scraps that I might need someday are the biggest space-wasters in my shop.

Ed

Re: Shop organization question

#4

Alan Zenreich

Re: Shop organization question

Alan Zenreich

Steve,

I've been in your shop. If you think you've got "too much stuff" in your shop, you'll need valium when you finally come to visit ours.

Re: Shop organization question

#5

Alan Zenreich

Re: Shop organization question

Alan Zenreich

I did a quick mental tour of the tools in my shop. I agree that some of it was used for types of projects that I haven't done for a while.

The items that have been idle for more than a year:

- Thickness planer

- 6" jointer

- assorted hand planes

I'm guessing that this is common for those of us who subsequently fell/jumped into the woodturning vortex.

Re: Shop organization question

#6

If I were to go by the rule that .......

JamieDonaldson

.....if it hasn't been used in the last year, then toss it out, my shop would be 3/4 empty! The planer, table saw, and jointer are under tarps on the opposite side wall where they have been resting for about 20 years, but I might need them again some day? And how about stuff like the gallon cans of leftover paint when we repainted 2 colors ago? Too much Scottish ancestry? :(

Re: Shop organization question

#7

Katherine Kowalski

Re: Shop organization question

Katherine Kowalski

Steve,

I made a "not enough space" comment. However, what I was referring to was not the square footage of my garage, but the created surfaces that people use to store/hide the tools and wood they use. My main problem is lack of money. I need:

- A Tool Chest. Yes, this is basic, but I don't have one! (At the moment, screwdrivers, wrenches, and all manner of heavy metal bits and pieces are scattered between an old dresser than we inherited from the previous owners (whose drawers are falling apart), and a plastic drawer cabinet. Yes, both unattractive, but they are working... temporarily). A tool chest would also solve my turning accessories problem -- chucks and wrenches would never go missing, since they would be located centrally.

- I'd love to have more shelves for all of the pre-cut blanks, and woods that need drying. I've also allocated storage space in my shed for roughed-out blanks... when I can get the shelves installed.

- I also need TIME to sort a lot of things out. I have numerous items that need processing -- such as a large tote box filled with box elder burl scraps that need slicing into pen blanks.

My difficulty is that I have so many ideas for work, that any "free" shop time is more delightfully spent actually turning!

However, I have to say that I was intrigued by some of the photos posted -- I observed some very neat ways of doing things, which I will soon be adding to my own shop. (John Lucas's storage of sanding belts, for one).

Off to work!

Katherine

Re: Shop organization question

#8

Re: Shop organization question

john lucas

Steve I've been trying to redo my shop. I wish I had time to build cabinet, that might help. I think I might be able to do away with a few things but I do so many different things that I'm always needing something else. A reciprocating drum sander is high on my list as well as a decent belt sander but where would I put those things.

I did just sell a Radial Arm saw and miter saw and replaced it with a sliding miter saw. Unfortunately I still have 5 lathes on the floor. I'm trying to sell 2 of them and still don't know what to do with the spring pole lathe that is taking up space.

If I could get a shed to put wood, my bicycles, my motorcycle, forge, and garden tools in it would really give me more space.

Re: Shop organization question

#9

Dick Hines

Re: If I were to go by the rule that .......

Dick Hines

Jamie, you could do like I did. I gave a friend my planer and table saw because I did use them and did not have the extra space. I have use of them any time I need and have more space in the shop.

Re: Shop organization question

#10

Re: Shop organization question

robo hippy

My joke about my first shop, 400 sq. ft, was that it was packed so tight, I had to open a window or door if I needed to pass gas. My current shop is 860 sq. ft. Not big enough. If I moved my dust collector and compressor outside, that would add some room, but still not enough. My table saw, jointer, planer, and drum sander still get used, but not as much as my bandsaws, drill press, and lathe. It would be nice not to have to wheel things out into space to be able to use them. Every time I get done with a tool and put it back, I find one more operation that I needed to do and forgot. I would like to add another lathe or two and start having shop sessions/teaching.

I did see an ideal place in the paper some years back: 1800 feet of river frontage, 28 acres, bass ponds, year round streams, 3 houses, multiple out buildings, and a 10,000 sq. ft. shop. Of course, there was no price listed.

I have cleaned up a bit, and organized, and found a square that has been missing for a year, and a 3/8 inch Thompson gouge that I thought I had, but then thought maybe I didn't get it after all. I have way too much wood, and am trying to get rid of it at club meetings.

robo hippy

Re: Shop organization question

#11

Re: Shop organization question

Stuart Johnson

I doubt if shop rearranging will ever stop. There are things that can be done to make it more organized by using all the space available. I'm a big fan of cabinets they are easily made or fairly inexpensive from salvage yards. Labeled drawers are better than shelves and shelves with doors are better than open shelves. I make all of my cabinets roughly the size of kitchen upper cabinets. Lower sized kitchen cabinets are too deep and things get lost in the back. Both my upper and lower cabinets are hung with French cleats and can be moved with no problem.

Horizontal surfaces are magnets for clutter and dust. I'm playing with the idea of adding slanted tops with a small lip like a lectern on the lower cabinets to force me to put stuff away or at least not stack it up. If they are hinged then a bit more space has been found.

A lot of space is frequently overlooked. The tablesaw fence extension and out feed table will hold a lot of drawers. The bandsaw stand can be enclosed and you have a space for coiled blades and accessories. A cabinet on wheels built around the drill press will hold all your bits and other items.

I'm very fortunate to have 12 foot walls but just about any shop has room up higher where wire shelving can hold blanks and drying rough outs.

My problem is I'm retired and have so much time on my hands I don't have time to get anything done.

Re: Shop organization question

#12

Re: Shop organization question

Mike Brazeau

That was one of my worries when my wife wanted me to use our old kitchen cupboards a couple of years ago and I just didn't want to do the work. At the last hour, I cancelled the Habitat for Humanity truck and did it mostly over the Labour day weekend two years ago. The end result was fantatsic and I generally am much better organized, somewhat tidier with lots of drawers and cupboards and the former pantry for power hand tools and vacuum hose closet for hanging stuff like saws & 4 foot level etc. The rarely used stuff is the biggest problem. Now if I can only find my gap measuring tool so I can put a new spark plug in the lawn mower.....

Re: Shop organization question

#13

Re: Shop organization question

Mike Brazeau

We built a 16x20 shed last year for just that including lawn tractor and a Kubota with bucket and tiller. then our daughter hurredly bought the place next door and in the chaos of the transition, we ended up with a lot of stuff in our garage, where it stiill sits It is worse than before the shed was built. can't win.

Re: Shop organization question

#14

Re: If I were to go by the rule that .......

Mike Brazeau

If I gave up my table saw I would not have a place to work or put stuff temporarily.

Re: Shop organization question

#15

My shop evolves

mfoster

I find that I live with the way things are for quite a while, till I find it frustrating doing work arounds or looking for something too many times. I then take the time to improve the ergonomics of my shop. When I got my Beauty, it was a perfect time to reorganize the turnig area. I gave the lathe more of a center stage in the shop and added an overhead dental track light and reorganized the lathe tool storage to make things handier.

I have a wall in the shop that I have thought about reworking for a few years but just haven't had enough impetus to get er done. Someday, I'll get to it.

I recently was looking at some floor plans of the shop that I made while building it in 2000. The major layout is still much the same, but a lot of things have shifted around to make things more efficient.

I can relate to those who just don't want to take the time from turning, or whatever you doin your shop, to make improvements. I do find that I always feel like it is time well spent when I get around to making changes.

Re: Shop organization question

#16

Re: If I were to go by the rule that .......

john lucas

As much stuff as I have in my shop very little of it goes unused for any length of time. My table saw is constantly used for something. It makes a really good photo table when shooting work.

Re: Shop organization question

#17

Re: Shop organization question

Mark Trenier

After breaking the start button off my Performax 22-44 sander (and using words that aren't allowed in church, I had to rearrange my shop for the third time this summer. I think I finally found a way to get my Lathe in the shop and still have room to roll once in awhile machines in and out. I find I am getting things into a much more compact area and I have gotten rid of all those things that are useful but in the way. It's a process. I'm working my way through it.

Re: Shop organization question

#18

Joe Fleming

Re: Shop organization question

Joe Fleming

Two comments.

I have five 2' x 4' industrial shelf units in my garage. Three are for storing turning blanks, one for hardware and supplies, and one for small tools (drills, sanding station, sawz-all, mini lathe, etc). I have a 3' x 6' workbench, a Stubby lathe, 14" bandsaw, grinding station, small work table, drill press, contractor's table saw, and dust collector. Everything is in a one car garage except one wood storage shelf. It and my compressor are in the next stall. The key here is to go vertical to maximize space.

A couple of years ago, I decided to move two of the shelves, the dust collector and the workbench. Since I had to move everything around, replumb the dust collection and move the wood around, I effectively cleaned the whole shop. So my recommendation here is to decide to move a couple of major chunks around every few years. It forces cleaning, purging, lots of Craig's List selling, and a very happy spouse.

Re: Shop organization question

#19

Re: Shop organization question

Bart Leetch

You'all quit your whining & crying now & wipe your eyes at least you have a shop. All my tools are in storage where I can see a few of them or maybe just a corner of a table or something on a visit to find some little thing I need. Been living in a motor home since January no work.

But I am about to start work here soon. With my own rental vacancy cleaning business for apartments, duplexes privately owned rental housing etc. We have over 4000 apartments locally + homes & military housing. If you want to work now days you either have to go where work is, or make work where your at. We like where we're located so I'll just make work here.