Dirty workbench
John Lucas
One of these days I've got to learn to work on one thing at a time. This weekend I built a replacement end for the picture frame in the front. I got the finish and carving so close I have to look close to tell which one it is. It had grooves cut in the side. I found out that it almost perfectly matched a 10 TPI thread chaser so I used that as a custom scraper and matched that detail exactly.
Then I redid a friends footboard for her bed. It was a pain because someone had nailed all the parts together and taped it up with Duct Tape. I replaced the broken section and recarved it. Then reglued everything.
I'm working on 2 footed bowls, 3 segmented vessels and a fake natural edge bowl. 






