Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Second Multi-Axis Project

Posts

Second Multi-Axis Project

#1

Second Multi-Axis Project

Paulo Marin

Last time I turned some female forms I had learned from Chris Stott inspired by an article I read about Barbara Dill (I love her papers and studies).

I used a few walnut pieces given to me as a gift collected from a barn which was allegedly over 100 years old. These pieces were very dry. Multi-Axis turning is exciting because they inherently have some danger. On the female forms, since they are long, you don't feel it as much, but when you tackle a Soren Berger's ladle (or scoop as he calls it), things change quite a bit.

I have turned several of these "scoops" in the past, but it has been a long time ago.. Since I had left over walnut, I decided to revisit my notes given to me by Soren on the way to the airport.

Soren Berger, is a phenomenal artist, toolmaker and woodturner from New Zealand. I know him very well and spent a considerable time with him learning some "pretty cool" stuff. I was immediately attracted to these scoops, because of the large amount of variations you can obtain. I recently found out he lost his wife. It saddened me because I know she was a tremendous supporter of his work, a great wife and mother. So, my heart goes to you Soren

The first one I turned with Soren I used Osage Orange. I won a first prize at the Ventura County Fair. It brought in a whopping $5. It no longer has that "yellow color"... it looks a lot like walnut.

On this specific piece, I went for a more "robust" look. It took about 2.5 hours to turn it.

As I mentioned before, I encourage all of you to experiment with "off-center" work. You don't need any special tools or accessories... if you would like to see Soren turning one of these, I accidentally found a video on the internet. If you will go to the woodworkingchannel.com under the Members tab click Soren Berger, and you will find the video.

You will be able to see Soren demonstrating with it.. I think it is a very cool project.

Critiques are welcome... Once again, apologies for any defects you might notice... just trying to squeeze in some turning before I forget what I have learned... My mind has been very occupied lately with beer brewing. God I love that stuff..

Honey..... look what I turned specially for you... a beautiful scoop.... Can I buy a Blichmann Fermenter... it's only $1000?

;)

Re: Second Multi-Axis Project

#2

Re: Second Multi-Axis Project

David Walser

Paulo,

That's a very nice scoop. Every time I see one in the Berger style, it moves up on my "gotta-do-someday" list. Thanks for the inspiration.

Re: Second Multi-Axis Project

#3

Re: Second Multi-Axis Project

Barry Irby

Paulo, that's a beautiful scoop. I will have to try one.

As an aside, You are a tool maker, right? I think you should look at Steve's post about finding the center of a large cylinder. It's interesting in it's own right, but take a careful look at the wrench and hammer. Might be an inspiration there for a new line of tools. Can't imagine anything much further from what you are making now and yet still "tools". Being "tools" this is not exactly thinking outside the the box, but pretty close. You can thank me (and Steve) later. :D

Someone compalined aobut OT posts...just look at what we got to see...WOW.

Re: Second Multi-Axis Project

#4

Re: Second Multi-Axis Project

John Lucas

Beautifully done Paulo. The curve on the outside looks perfect. The design of the handle is excellent as well.

Re: Second Multi-Axis Project

#5

Re: Second Multi-Axis Project

George Van Beynen

Paulo, Soren would be proud to see your take on his scoop, this is an interesting shape with the addition of the beads. Definitely �Robust�

I too have had the pleasure of spending a few days and evenings with Soren, he is an interesting fellow to visit with to say the least. Now that you have shown me this scoop it reminds me that I have his �rings� to hold the cup in the chuck without marring the surface. I will have to give one a go when time permits, but before the scoop I am anxious to try my new 1-�� Glaser skew that I received from you! I want to report how it felt but hardwood floors are taking a priority at this time. :o(

Re: Second Multi-Axis Project

#6

Don Leydens

Re: Second Multi-Axis Project

Don Leydens

That's a beautiful scoop. The handle angle looks great and the whole piece works so well. Well done!

Re: Second Multi-Axis Project

#7

Katherine Kowalski

Beautiful piece, Paulo!

Katherine Kowalski

Re: Second Multi-Axis Project

#8

Re: Beautiful piece, Paulo!

Paulo Marin

Thank you all for these wonderful comments... I just wish I could photograph as well as John Lucas can.. I'm working on it... and if I may share with everybody, George is a talented woodworker. I had the privilege of seeing some pictures of his absolutely gorgeous home. I am so impressed that I am planning to come see the area and consider it for retirement. I can see myself already building a 2000 sqft BREWERY :)

George must have had over 2000 bowls turned... incredible!

My next project will be to pay homage to one of the most talented woodturners alive today. Mr. Alan Batty.

I have learned most of my turning skills from Alan.. the only woodturner alive today who went through an apprenticeship in England.

Thanks folks..

Re: Second Multi-Axis Project

#9

Moving...

David Walser

Paulo,

As long as you're considering moving, why not move both you and your business to nearby Arizona? Lot's of Californians are doing it. We'd love to have you and, I understand, Arizona has plenty of beer drinkers who'd be willing to help make your retirement venture profitable.

Re: Second Multi-Axis Project

#10

Arizona and the Phoenix Lights

Paulo Marin

Extremely enticing invitation... not only for the woodturning and the beer making, but I have been for many years fascinated about the Phoenix Lights event.

(don't you all start laughing now... check it for yourselves ;) )

I was in Arizona about three months ago when I met Bonnie Klein there to talk some future business venture and I was fascinated with the night skies..

With that heat and 15 gallon batches of my favorite IPA's plus woodturning and mysterious nigh lights gets to be tempting to leave California..

Thanks for the invitation!

Honey...look... David Walser invited us to come to Arizona and not only did he say they would love to have us, but he says they sell Blichmann Fermenters there cheaper... ;)

Re: Second Multi-Axis Project

#11

Steven Antonucci

Always loved this scoop (since I saw the video)

steven antonucci

and you've done a great job in producing a Berger scoop. Someday I'll make one too.

Steve

Re: Second Multi-Axis Project

#12

Re: Arizona and the Phoenix Lights

Carol Reed, Strawberry, AZ

More to Arizona than Phoenix!

To add a little icing to the cake, just down the road from me is new building going up designed for a micro brewery and restaurant, complete with the necessary permits and zoning. The original investor for the brewery lost his financing and the search is on for another.

This is up in the cool mountains just under the Rim at 6200 feet. I am absolutely certain we can find space for tool making as well! Tall Ponderosa pines, azure blue skies, no street lights to ruin the night skies, see forever views, crystal mountain lakes. Awesome! Right now it is only 81 degrees, with a slight breeze. Three different turning clubs each within a hundred miles. And I am not even in real estate. LOL!

Re: Second Multi-Axis Project

#13

Re: Always loved this scoop (since I saw the video

Paulo Marin

Thank you for the compliment Steve! I guarantee you will produce great scoops. It is addicting...

I also hope your son Frank is getting better and better! Wish you and your family the best!

I appreciate the compliments and just will not be able to sleep tonight thinking of the possibility of having a brewery on one side and the business on the other...

Honey... oh Honey.... look... Carol Reed says there is a great building for sale in Arizona.. she says Tall Ponderosa pines, azure blue skies, no street lights to ruin the night skies, see forever views, crystal mountain lakes.... she also says that the Blichmann Fermenter is cheaper in Arizona

God I hope she falls for this one ;)

Re: Second Multi-Axis Project

#14

Steven Antonucci

Better off being a blacksmith if you like beer

steven antonucci

The shop at Peters Valley has a strict no alcohol policy in the woodworking studio, but the blacksmiths are allowed to drink in moderation with the forge lit.

The Pysanky egg painters drink herbal tea and listen to Enya...

Steve

Re: Second Multi-Axis Project

#15

Re: Arizona and the Phoenix Lights

David Walser

Honey...look... David Walser invited us to come to Arizona and not only did he say they would love to have us, but he says they sell Blichmann Fermenters there cheaper...

Well, actually, I didn't say Blichmann Fermenters are less expensive here than they are in California. I will say that by moving here you'll save enough in taxes to buy several Blichmann Fermenters at full price. Or, you could just buy one fermenter and choose to retire a few years earlier. :)