Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

brochure holder

Posts

brochure holder

#1

brochure holder

bob davis

i would like to construct a holder for our club brochures with some kind of woodturning look. one thought...box with corner finials. all ideas appreciated.

Re: brochure holder

#2

Richard Allen

Re: brochure holder

Richard Allen

How about a hollow form (only you don't hollow it). Cut it in half top to bottom. The two halves become the sides to the brochure holder. Make 4 spindles to connect the halves together. Two at the bottom, one in front and one in back. Then one in back near the top and one in front near the middle (or 2/3 the way up). Make two small spindle to go between the tow bottom spindles (the brochures will rest on these spindles). Two small spindles to go from the bottom back spindle to the top back spindle. Two small spindles to go from the front bottom spindle to the front top spindle. This forms a cage for the brochures with "hollow form" shapes on each side.

10 spindles and a hollow form cut in half.

Re: brochure holder

#3

Ric Taylor

Here's What We Did

Ric Taylor

Mesquite vessel turned by Ed Peine and I did the laser engraving. It sits by the cash register at a prominent woodworking store.

Ric