Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Favorite Waste Block Material

Posts

Favorite Waste Block Material

#1

Favorite Waste Block Material

Doug Reynolds in Seattle

What is your favorite waste block material? I need to make some and find birch very hard and suspect 2X4 construction material is too soft.

Re: Favorite Waste Block Material

#2

Steven Antonucci

Maple or cherry

steven antonucci

mainly because I have maple and cherry.

Birch shouldn't be too hard? Sort of the same as maple and cherry. 2x stock isn't very useful.

Steve

Re: Favorite Waste Block Material

#3

JL

Poplar

JL

though soft maple also works for me.

Re: Favorite Waste Block Material

#4

Alder

Carol Reed, Strawberry, AZ

...and right in your backyard. Get a short of 5/4. It will make lots of blocks. Thanks to Wally Dickerman for that one.

Re: Favorite Waste Block Material

#5

maple

Jorge Castaneda

Re: Favorite Waste Block Material

#6

Re: Favorite Waste Block Material

George Van Beynen

Doug, I have had good luck with basswood. I cut a few trees on the sawmill for carving and glue block blanks. All have held without separation. I agree that white �paper� birch should not be too hard and should be economical and readily available.

Re: Favorite Waste Block Material

#7

Re: Favorite Waste Block Material

Mike Rubes, Apex, NC

Hi Doug,

I pretty much use whatever hardwood I have around at the time. I've used maple, oak, poplar and even a chunk of cherry. I've had far more failures from a poor glue joint than the waste block itself.

Good luck!

Mike

Been too hot to turn, maybe this weekend will be better in Apex, NC

Re: Favorite Waste Block Material

#8

Re: Favorite Waste Block Material

Sam Scalzo

Doug,

I use alder as per Wally Dickeran. It is a very stable wood.

Sam

Re: Favorite Waste Block Material

#9

Rob Wallace

Poplar and Maple

Rob Wallace

Re: Favorite Waste Block Material

#10

free

ihmserv

preferably hardwood, but I have use construction cutoffs if I have to.

I stay away from ply and MDF

IAN

Re: Favorite Waste Block Material

#11

Maple but ...

Bill Howatt

I have no problem using 2X softwood for many things.

Bill

Re: Favorite Waste Block Material

#12

Re: Favorite Waste Block Material

Frank Van Atta

Oak is my favorite, followed by anything that happens to be handy . . .