Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Thanks To Many

Posts

Thanks To Many

#1

Thanks To Many

Don Orr

This is a recently completed piece made form curly ambrosia maple. As the title says, I have many to thank for their influence and assistance with it. Thanks to Andy DiPietro for influencing the shape. I tried to give it the tall, smooth curve he is so well known for. Thanks also to Jennifer Shirley for getting me to think about and plan some embellishment with a pyro pen. Most of the thanks, however, go to George Guadiane for letting me go to his shop and try out the Monster articulated hollowing system. He also very generously donated the beautiful piece of wood to use as a practice piece.

It's about 7" tall and a little over 3" at the widest. Finished with 2 coats of Bush oil wet sanded in and then buffed with a final coat of LV microcrystaline wax.

All comments and critiques are welcomed and encouraged

So, thanks to all who provided input in whatever form it came in. Most of all, thanks to George for the wood and tools and shop time-and for being a good friend.

Re: Thanks To Many

#2

Re: Thanks To Many

Randy Gleckler

Very nice job Don, I love the shape, the burning looks good and you did a great job.

Re: Thanks To Many

#3

Don Leydens

Re: Thanks To Many

Don Leydens

Excellent work, Don. Love the shape. I also have a Monster Hollowing set up and love it! Well done.

Re: Thanks To Many

#4

Re: Thanks To Many

George Van Beynen

Don, this is an �all around� beautiful hollow form. Shape, finish, and pyrography are well done.

PS. You are hooked��I know you are already planning your next piece?

Re: Thanks To Many

#5

Re: Thanks To Many

Mike Rubes, Apex, NC

Hi Don,

That looks great! I like the pyro work at the top, it works very well with the slight lip you put on it. The finish looks very nice as well. I love the wood choice, ambrosia maple is a personal favorite.

Thanks for the pic,

Mike

Finally a day under 100F in Apex, NC!!

Re: Thanks To Many

#6

what is "Bush oil"?

adrien

Re: Thanks To Many

#7

Leo Cuellar

Re: Thanks To Many

Leo Cuellar

Beautiful work, Don! Those curves really flow.

Re: Thanks To Many

#8

NICE!

George Guadiane

Don,

It was fun watching you use the Monster for the first time. It was even MORE fun holding back when I couldn't see the form you were going for and thinking it would end up looking odd... But I held my tongue (for the most part) and you produced this elegant form.

As usual, than YOU for letting me watch you work. You're a true and ardent craftsman.

Re: Thanks To Many

#10

Re: found source

Don Orr

It's made near here in Amsterdam, NY and is a local favorite. Curtis Lumber also carries it. Not sure about wider or national distribution. When we had a Woodcraft store here they carried it.

Good product. It is what I use almost exclusively. High solids content, buffs out nicely, will not harden in the can. Bill Bush is a phenomenal designer and woodworker.

Re: Thanks To Many

#11

Re: Thanks Again

Don Orr

For all the nice comments.

Anybody have any suggestions for changes or improvements? I'm pleased with the piece but there is always room to do better.