Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

excentric chucks adinfinitum.

Posts

excentric chucks adinfinitum.

#1

excentric chucks adinfinitum.

avalon

ok.. im not turning anything until my shop is built, but im looking at improvements for Christmas presents to myself... (who am i kidding... my wife just delivered twins... Christmas is no longer the "just find something the wife will like" holiday...)

Im wanting to do inlays of pendants like they have photos of at craft supplies for the axminster eccentric chuck...

then there is the sorby eccentric chuck...

and then i found a pendant backer plate from richard joyner.. videos are on yoyospin.com...

there was an article in the woodturning magazine a few months ago about making pendants and his was in the article..

i like the axminster results, but will it give me the results using the other chucks? not ready for eccentric spindal turning...

Re: excentric chucks adinfinitum.

#2

Re: excentric chucks adinfinitum.

Darryl

The pendant holding unit is not a chuck in the usual sense of the word. It does turn off center but the wood is not held by jaws. the other units are chucks and allow one to turn off center. Since this is not your primary way to make a living you might want to try the pendant "thingy" and graduate to the more exotic turnings after your first natural edge bowl is on the shelf.

Re: excentric chucks adinfinitum.

#3

Re: excentric chucks adinfinitum.

john lucas

I teach pendant making without a chuck even though I have my own homemade version of the Joiner chuck.

What I do is 2 things. First is, I use a square glue block. This can be tilted in any direction on the 4 jaw chucks we use to give you some eccentric like affects. To be more versatile I use a rectangular glue block and remove 2 jaws from my chuck. This not only lets you tilt the glue block but you can also slide it up and down (or sideways if that's what you want).

I would have to go back an look at the article I wrote for Woodturning. I saw the first article (having a senior moment and can't remember who wrote it, possible Nick Agar) I loved it and made of bunch of his pendants. While doing that I came up with the idea for the rectangular and square glue block and wrote an article for them describing this. I would have to look up the issue # for you. It was probably 3 to 6 months later.

When I taught my class at John c Campbell we also tried making earrings using the same glue blocks. They look like miniature pendants and worked very well.

I have planned some modifications to the Joyner jig but simply haven't had time to try it out. I want to be able to tilt the jig as well as the off center and rotational capabilities it has.

Re: excentric chucks adinfinitum.

#4

Re: excentric chucks adinfinitum.

Randy Gleckler

Have any pics John to help me visualize the use and result?

Re: excentric chucks adinfinitum.

#5

Leo Cuellar

Re: excentric chucks adinfinitum. *LINK*

Leo Cuellar

You can do a lot of eccentric turning just with centers, but it depends on how well your lathe is fastened down. :D It doesn't necessarily have to be a spindle. Other things to try are good hot melt glue & a tapered glue block in your chuck. Here"s a nice little Robert Sorby video that helped me out quit a bit. You can get different shapes using more or less points and by changing the distance out from center. If you want to make pendants, you could probably do quite a bit with a face plate & some double sided tape. Have fun!!!


3 Sided Bowl

Re: excentric chucks adinfinitum.

#6

Re: excentric chucks adinfinitum.

john lucas

Randy I don't have any on this computer. I'll try to post some tonight if I can find them. I'm the worlds worst at storing and retrieving photos.

Re: excentric chucks adinfinitum.

#7

found a few photos

john lucas

These don't have all the fancy work that can be done using the square glue block but you can see the off center hole. The tapered look is done by tilting the glue block during part of the turning.


Re: excentric chucks adinfinitum.

#8

Re: excentric chucks adinfinitum.

Mark J. Thill

Have you checked out the EXMK eccentric chuck on youtube, 4 videos. Interesting...