Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Kaput coring blade

Posts

Kaput coring blade

#1

Kaput coring blade

Jorge Castaneda

Today I broke the blade used the most of my Kelton rig, the middle curved from the standard set.

Is there life after death? Shall I jump to buy a new one or this can be salvaged.

I was to post a picture, but the forum software is not as usual, a bunch of features are missing, like the browse to load a picture from disk.

Re: Kaput coring blade

#2

Re: Kaput coring blade

Greg Haugen

Jorge,

Sign in to your profile, or create one. It will be there then. If you still have problems, let me know.

Re: Kaput coring blade

#3

Amazing service!!

Jorge Castaneda

Kel Mc Noughton contacted me already about my problem!

Much appreciated Kel.

Re: Kaput coring blade

#4

Re: Kaput coring blade

Jorge Castaneda

Thank you Greg, i"ll do it tomorrow first thing.

Re: Kaput coring blade

#5

Re: Kaput coring blade

robo hippy

I am guessing that it was bent beyond being able to bend back into proper shape. That is the most common thing that happens with extended use, or a few good catches, so bending back isn't too much of a problem. Kel is a good man to deal with.

robo hippy

Re: Kaput coring blade

#6

Re: Kaput coring blade

Jorge Castaneda

Reed,

It is not bend, I was going into a maple rootball, just the very tip broke, must have hit gravel.

Re: Kaput coring blade

#7

Re: Kaput coring blade

Greg Haugen

Kel is a great person to deal with. Glad you got it taken care of.

I've seen stones that were in the 6" diameter wrapped up in root balls. Boy that would sure cause some havoc on the lathe.

Re: Kaput coring blade

#8

Re: Kaput coring blade

George Van Beynen

Or leaving the lathe at 600rpm. :D

Re: Kaput coring blade

#9

Re: Kaput coring blade

robo hippy

Well, Jorge, that is one trick with the McNaughton that I have never done.

robo hippy

Re: Kaput coring blade

#10

Ken Vaughan

Kaput coring blade - Rettipping

Ken Vaughan

I think Mike Hunter has retipped some McNaughton blades -- that is an alternative to replacement.

Re: Kaput coring blade

#11

Re:  Kaput coring blade - Rettipping

john lucas

He does and it works great. I have one. They are diamond shaped carbide cutters and man do they cut.

Re: Kaput coring blade

#12

Thanks Kel!

Jorge Castaneda

I followed your suggestion and did grind away and the blade is back in business.

Robo, don't try it it is not fun.

Thanks everybody