Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Double your pleasure....

Posts

Double your pleasure....

#1

Mike Stafford

Double your pleasure....

Mike Stafford

Ed Moore convinced me to try the Glaser HiTec 7/16" detail gouge a few weeks ago. I did and I love it for doing end grain shaping and hollowing.

After using it for a few weeks I decided to try the 1/2" spindle gouge so I placed an order with Paulo Marin.

Earlier today my gouge arrived and Paulo had most generously substituted a Glaser HiTec 15V Bob Stocksdale spindle gouge for the 10V I had ordered. It is very hot here with temperatures hovering around 100 but I had to try it out. I went to the shop, sharpened it to the grind that I prefer and put the tool to the wood. I had a piece of dry cherry between centers and the tool peeled off shavings beautifully. It was too darn hot to do much more.

The quality of these Glaser tools is unparalleled. I am impressed with the balance and comfort the handle provides. The detail gouge has proven to stay sharp for a very long time. I look forward to more turning with my new Glaser HiTec 15V Bob Stocksdale spindle gouge.

Paulo, thank you for the generous substitution. I appreciate it very much.

Here are some pics of my dynamic Glaser duo.


Re: Double your pleasure....

#2

Re: Double your pleasure....

Harvey Ghesser

Congratulations on your latest acquisitons, Mike!

I have found, as I'm sure you have too, that not only are Glaser HiTech tools a joy to behold but they are extremely efficient in the work they were meant for.

You will love them! :D

Re: Double your pleasure....

#3

Re: Double your pleasure....

Brian McInturff

Mike,

There is nothing like the 15v tools. I really do love mine. I like the personal touch of the engraving too. Very professional. I can't wait for the heat to break so I can get back out to the shop. Be careful out there in this heat.

Re: Double your pleasure....

#4

Re: Double your pleasure....

George Van Beynen

Good for you Mike, I 'm sure you will get many miles out of the new addition. I am waiting for my 1-1/4" skew to compare to my Glaser.

Re: Double your pleasure....

#5

Don Leydens

Re: Double your pleasure....

Don Leydens

So, is this steel supposed to be longer lasting than the Thompson tools?

Re: Double your pleasure....

#6

Both manufacturers start with the same steel......

Greg Haugen

Both manufacturers start with the same steel, 10V/A11 and 15V, and they both have their own treatment process. After that it's the "fit and finish" of the tool along with the flute geometry and that IS PERSONAL PREFERENCE. The steel and flute do play a role in a tool's performance, but often times the skill of the turner plays just as big as a role. IF a turner is efficient in sharpening and uses proper cutting technique their tool will "stay sharp" longer than someone with less than an efficient technique who may lean more to a "scrape" than a proper cut. Both manufacturers do offer a good product, many people like them. It's personal preference. Short of the carbide tools out there, there isn't a "steel" tool that isn't going to have to be sharpened. The flute geometry can make a tool's performance different than others, and the fit and finish of the tool is another factor but it much more of a personal preference.

Re: Double your pleasure....

#7

Don Leydens

Re: Both manufacturers start with the same steel..

Don Leydens

Thanks for the info Greg and Harvey!

Don

Re: Double your pleasure....

#8

Mike Stafford

Please read....

Mike Stafford

I posted this message because I was happy to have a new tool. It was not supposed to be a commentary on which tool or steel is better.

Please do not take this "gloat" down the road of arguing about which tool or steel or treatment is the best. I do not know and probably will never be sophisticated enough to fully appreciate the difference. You must remember that I am a guy who thinks the best tool he owns is a Craftsman 3/32" diamond parting tool which cost $7.

My intent was to just share my pleasure of owning a new tool, nothing more. Please just leave it at that.

Re: Double your pleasure....

#9

Re: Double your pleasure....

john lucas

Mike Congratulations. I think you'll enjoy it. I enjoy all the new tools whatever they are. Tools become such a personal thing after awhile. I remember when I first got my Thompson gouge I kept going back to my old no name bowl gouge. It just had a grind I had learned to use and felt comfortable.

I love the look of the D Way and Glaser. Very classy. There are so many great tools out there now. We are very lucky to have the tools available to us today, and to have the choices. Hope we can continue to support all of them and keep them in business.

Re: Double your pleasure....

#10

Re: Please read....

Dale Miner

I took it as a gloat, and nothing more.

Oh, btw, a dear friend of ours dropped off two cakes at our house yesterday. One was a chocolate layer cake with a thick chocolate fudge like frosting between the layers and chocolate chips in the cake. The other was a 'to die for' carrot cake, and there is still over half of the carrot cake left :) .

Howdja like that gloat?

Re: Double your pleasure....

#11

Bill Blasic

Re: Both manufacturers start with the same steel..

Bill Blasic

Greg,

Thanks, question asked and answered.

Bill

Re: Double your pleasure....

#12

Mike Stafford

Re: Please read....

Mike Stafford

Now that is a gloat I wish I could share with you. Carrot cake is one of my favorites!

Re: Double your pleasure....

#13

DALE!! You are indeed a dirtymean...

JamieDonaldson

..andevilwickedbadandnasty person for making such a post without means of sharing!!!!!! :b

Re: Double your pleasure....

#14

Re: DALE!! You are indeed a dirtymean...

Dale Miner

Sharing?

We don't need no steenking sharing.