Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Three Ladies from a Barn >>>>>>>

Posts

Three Ladies from a Barn >>>>>>>

#1

Three Ladies from a Barn >>>>>>>

Glaser Hitec

Not too long ago, I read a great post by Charlie Belden about Barbara Dill's great work with "multi-axis".

I visited her site (www.barbaradill.com) and was extremely excited with the possibility of changing spindle turning (which some might consider boring) to something more exciting. If you have not visited her site, she has amassed an incredible treatise on the subject and it is graciously available for download in pdf form.

It brought back memories to me when I had the opportunity to learn �off-center� work from a legendary woodturner by the name of Chris Stott. When I started turning, he was one of the first videos I watched. I learned a lot from Chris. Then later on, his teachings helped me tremendously when I had the pleasure of taking private classes from another fantastic woodturner by the name of Soren Berger. With him I turned one of his famous ladles. Both experiences were enjoyable! Both turnings were �off-center�.

So, I decided to turn the female form again. I inspected my wood pile and found a few walnut pieces brought to me by a friend after her grandfather�s barn was destroyed. According to her, the barn was over 150 years old.

I recently purchased a Yates-American lathe for $600 from the Los Angeles School District. The broker told me it was sitting in a warehouse since 1969. Although old, the lathe has variable speed and the motor is only a �� horse (enough to turn these ladies). I am working on installing a bigger motor on it, because this is without a doubt a great machine... Too bad that some old manufacturers from the past, like Yates-American, no longer manufacture this lathe. I think they still make superb planers.

The walnut, although very dry, was incredibly figured with no visible cracks.

As you can probably notice, I did not apply finish to "one of the "ladies". The wood was beautiful. I thought I would leave it alone so perhaps I can experiment with dyes (probably next year sometime if I am lucky).

It was a delightful experience for me. It kind of brought back memories from when I had a lot of time and I turned all kinds of things. That is what happens when you make your hobby a business... you will never find time for the hobby again...

I hope you enjoy looking these three ladies. I strongly recommend this type of turning� No special chucks required and it will change your mind about spindle turning... it is not that boring after all!

In case you are interested, Chris has this lesson on his DVD: A lesson with Chris Stott: Basic Off Centre Turning.

Obviously, critiques and comments are welcome. If you notice too many flaws, please forgive me� I have not turned for awhile. Also, sorry for the pictures... I am still trying to apply some of John Lucas's teachings and instructions on photography.. It will take years.....

But I have been brewing phenomenal beers :)

Thank You!

Wish you all a great weekend!

ps: before I forget... some recognition should be made to the two platters present in the picture... The maple one with red borders was a gift to me from Tom Wirsing, and the other platter turned by Mark Baker... ( I purchased it at an auction on one of the Utah Symposiums. It is the platter that is on the cover of Mark's book). Both people are great turners.

Paulo Marin










Re: Three Ladies from a Barn >>>>>>>

#2

Steven Antonucci

Having just met Mark Sfirri...

steven antonucci

I have new respect for multi-center work. Using only two centers, he produced a few things right before our eyes. They were impressive, and I couldn't get my mind around the fact that they had only been turned on two centers.

Like the ladies... and I am assuming that they are only two centers each too?

Did you turn them with a skew?

Steve

Re: Three Ladies from a Barn >>>>>>>

#3

Three Ladies from a Barn>>>>>>>

Glaser Hitec

Yes Steve. Two centers only. Exciting turning. Takes spindle to another level.

Mark Sfirri is really cool too and lets not forget Jean Francois Escoulen.. I have been amazed by a chess set he has turned..

The tools used were:

- 1/2" Oval Bowl Gouge

- 3/8" Oval Bowl Gouge

- 3/8" Beading Tool

- 7/16" Skew Chisel

Re: Three Ladies from a Barn >>>>>>>

#4

Mike Stafford

Re: Three Ladies from a Barn >>>>>>>

Mike Stafford

Paulo, I am glad to see you have found time for some turning. I have only done a few pieces of off center work and never anything like the ladies you have pictured.

My first impression is that they represent a mother and her daughters. They also remind me of an Oscar. They are quite beautiful and make wonderful sculptures for display. I can imagine a forest of beautiful ladies turned from many different woods. Wouldn't that be spectacular! Very nice work!

I will have to down load Barbara's tutorial and add it to the list of things I want to learn to do.

Re: Three Ladies from a Barn >>>>>>>

#5

Re: Three Ladies from a Barn >>>>>>>

Glaser Hitec

A remark like this coming from the master of boxes is quite a compliment! Thank You Mike.... I am sure you will enjoy Barbara's work and if you have a chance, Chris video. As for the forest of ladies... what a great idea...I will keep that in mind.

Re: Three Ladies from a Barn >>>>>>>

#6

Re: Three Ladies from a Barn >>>>>>> *LINK*

charlie belden

These Three Ladies From A Barn are beautifully turned and elegant. Nice work for someone who doesn't get to turn much due to business committments ; )

The linked photo is "multi-axes series" - Nude Dudes - The Descent of Man - a tongue in cheek look at how we shrink in height and how stomachs and butts tend to descend - towards the floor. Your Ladies, and women in general, of course don't have to worry about this phenomenon right ?


Nude Dudes aka The Descent of Man ; )

Re: Three Ladies from a Barn >>>>>>>

#7

Excellent- I'm sure you had fun

John Lucas

It's nice to know you turn. I have been doing off center work for along time and love following Barbara, Jean Francois, Mark Sfirri and especially Steven Hogbin. Offcenter work is perfect for the human form.

Re: Three Ladies from a Barn >>>>>>>

#8

Re: Excellent- I'm sure you had fun

Glaser Hitec

Just need to take decent photos like you.. Working on it :)

Re: Three Ladies from a Barn >>>>>>>

#9

Don Leydens

Re: Three Ladies from a Barn>>>>>>>

Don Leydens

I really love these ladies. They're all very nicely shaped. I hope to give these a go!

Re: Three Ladies from a Barn >>>>>>>

#10

Re: Three Ladies from a Barn >>>>>>>

George Van Beynen

These are very well turned and finished Paulo. After seeing this i will have to dig out some spindle stock and give it a go. Looks like fun and I like the results!