Don't You Just Love It When A Plan Comes Together?
charlie belden
Don�t You Just Love It When A Plan Comes Together?
Have been playing, on and off, with an Epilog MiniHelix laser engraver�s gray scale 3D low relief �carving� capabilities. I�ve got the How To down for getting a gray scale image into Corel Draw, the user interface Epilog prefers. And I�ve learned how to use the Epilog to DO low relief �carving� � on both flat as well as curved surfaces � of wood.
The Missing Piece was a way of converting an actual 3D object into a 2D, gray scale image � that white was the highest areas or points (thickest) and black was the lowest area/point (thinness) with shades of gray as the in between depths of cut.
Seemed like the gray scale images needed would be the easiest of the things needed to do low relief 3D laser engraving/carving. But �black and white� images are using REFLECTED light � of the light shining ON the object. And when light shines ON a 3D object � it casts shadows. The laser interprets shadows as meaning �burn deeper�.
I needed a gray scale image that had �closer� = �lighter/don�t burn�, �farther� = �darker/burn deeper� � and black and white photographed images just don�t work for what I�m after.
I bought a Home Version of Mathematica and with it can do �primitive� 3D gray scale images (pyramids, cubes, cones, hemispheres, etc.) by describing them mathematically. But try and come up with equations for a rose or a face or a horse. A famous mathematician said �Give me enough parameters and I can come up with equations for an elephant. Give me one more parameter and I can make the tail wag.� I�m not THAT good at math.
What I needed was a type of photography that used TRANSMITTED light instead of REFLECTED light. And the TRANSMITTED light had to be a function of THICKNESS. What kind of light does THAT?
Answer: X-ray light!
I needed an X-ray machine. Have you priced X-ray machines lately?
BUT � my chiropractor has an X-ray machine!
So I explained what I was trying to do and asked if I could use her X-ray machine. She said SURE � just pay for the film and chemicals - $6 a film. Bring a low relief object, X-ray it and I�ll have what I�m after- almost.
Almost � because what I�d have was an 8x10 negative. To get the image into digital form I still need a scanner � a transparency scanner � that uses TRANSMITTED rather than REFLECTED light. Transparency scanners � for photo slides are relatively inexpensive. But one that will work for an 8x10 � at reasonably high resolution? They are a bit harder to come by � and of course � more expensive.
BUT � one of my dOntist (I have THREE) � has a digital X-ray unit.
This Plan may actually work.
BUT � the unit I knew he had was made to work for TEETH size X-rays � 1 �� x 1 ��.
T
oday at my dOntist appointment I ran my idea past him � his unit�s size limitation and my 8x10 X-ray scanning problem.
�That�s no problem. We scan 8x10 X-rays all the time. Bring me your X-rays films, I�ll scan them and burn them on a CD or DVD for you� (He was jazzed about the possibilities, especially after seeing the vase I�d turned and �carved� a shell pattern in).
I LOVE IT WHEN A PLAN COMES TOGETHER (you who are too young to remember the TV series The A-Team will have to google it or hit YouTube to get understand the quote).
Wait � it gets even better.
�I�ve got a CT scanner. While we wait for the novacaine � and the nitrous oxide to kick in I�ll do a CT scan of your vase.�
I�m on novacaine AND nitrous oxide and a Wild Hare Idea looks more doable than even I�d imagined � and I can imagine some pretty strange things.
But wait � it gets even better.
This morning Glen Krug (Glenn Krugg?) comes over to see The Redwood Slabs, having seen the two pieces I�d brought to last nights turning club meeting � to be raffled off to raise money for the club. THIS man KNOWS wood and turns really fine woods into even finer turned pieces.
He sees the pieces I had left on the driveway after photographing them yesterday afternoon. He focuses on a few of the pieces and his eyes start to light up. This man has turned some of the best of the best woods � and his eyes light up. Then we get to the remaining three slabs.
It�s one thing to see a semi-finished gem stone and see the beauty of it � and imagine what it will look like when cut and polished. But you have to have worked with gems in the rough often enough to see the beauty of the cut and polished piece inside an unworked rough.
He�s telling me what he sees � and I begin to see some of what he�s seeing. He�s reading the wood and writing its story � and I get to look over his shoulder and read as he�s writing. I�m only able to comprehend some of what he�s saying/writing � but I�m getting a contact high just being this close to his buzz.
He�s seeing things I can�t � and he�s asking me what I think. I�m babbling and he�s smiling, yellow chalk in hand, marking parts of one of the slabs and sharing his ideas of how he�ll use the pieces he�s marking. I�m standing there with my electric chainsaw � that I got a new chain for before Glen got here � wondering if my feet have actually left the ground � or did it just feel like they had.
Can it get any better than this?
Yes!
�I�m going to give some of this to John. He�s gonna love it.� Glen says.
�Whose John?� I ask.
I hear him say �John Sawyer�. He�s actually saying �Jon Sauer.�
�He does ornamental turning and he�s very good at it. He�ll do something really nice with this piece right here� he saus as he yellow chalks on the slab.
I cut where the yellow chalk lines are and carry one of the three pieces out to his car. He thanks me, offers to pay for the new chainsaw chain � which I declined � and he assures me that THESE pieces of wood will be used well (understatement BIG TIME).
I get on the computer and start googling �John Sawyer�. Half an hour later none of the hits for John Sawyer have anything to do with wood or turning.
Then I recall hearing the word Ornamental Turning. I google �ornamental turning� and up pops the name � Jon Sauer. Click on a link � for the Del Mano Gallery � and there�s Jon Sauer in the Artists List. Click on his gallery and . . .
Returning from the dOntist, I stop by the widow neighbor�s house to visit for a minute or two. While we�re visiting on her porch � a pair of hummingbirds perform a wonderful arial ballet for us. We both laugh and applaud.
When I get home I take out the grilled steak, grilled asparagus and saut�ed mushrooms daughter-in-law saved for me from last night�s barbecue that I missed to go to our monthly turning club meeting.
Don�t you just love it when a plan comes together � and so many Just So experiences happen in one day?
Today wasn�t just a good day � it was almost too perfect to have actually happened � but it did.





