Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Ironwood

Posts

Ironwood

#1

Jim Evans

Ironwood

Jim Evans

I'm in the process of getting an Arizona ironwood log about 3 feet long.

I don't know anything about and never used or seen this wood before.

Has anyone tried to turn this wood?

Re: Ironwood

#2

Steven Antonucci

Good for smaller stuff

steven antonucci

A lot of the ironwood I have seen has heartwood cracks, so I end up sawing it for smaller stuff... You will need to sharpen a lot... and it will show every mistake you make (and don't sand out)

But it takes a beautiful polish!

S

Re: Ironwood

#3

Mike Stafford

Re: Ironwood

Mike Stafford

I have turned one box and quite a few pens from this wood. The pens all sold immediately. It is beautiful!

I don't recall having any particular problems with it but I do think it had an unusual smell.

I don't have any pictures to share and I didn't save any of the smell... :b

Re: Ironwood

#4

Steven Antonucci

why does unusual usually mean bad with smells?

steven antonucci

Re: Ironwood

#5

Re: why does unusual usually mean bad with smells?

Emmett Manley, Lakeland, TN

Recently, I turned a small piece of that beautiful wood and literally almost choked to death -- it precipitated a full blown asthma attack, and I had not had one in years.

Be careful.

Re: Ironwood

#6

Jim Evans

Re: Ironwood 

Jim Evans

Here are a couple of pictures. It's 4 feet long and 6-7 inches in diameter.

As was mentioned it looks to be cracked pretty good, so small will be the order of the day.

Thanks for the toxicity warning.

Re: Ironwood

#7

Steven Antonucci

The chainsaw cut stops where the chainsaw died

steven antonucci

You might want to borrow someone else's saw to finish that cut. Just sayin ...

S

Re: Ironwood

#8

Jim Evans

Re: The chainsaw cut stops where the chainsaw died

Jim Evans

I'm wondering if my electric chain saw will even cut it.

There are a lot of worm holes, which makes me wonder what kind of a bug could bore through it.

Re: Ironwood

#9

Re: Ironwood

Jason Clark

I can say with almost 100% certainty that this is NOT Desert Ironwood (Olneya Tesota). A photo showing the end grain will easily confirm or refute my suspicion.

Desert Ironwood should have a medium to very dark brown heart wood with bright yellow sap wood. The shape of the log and the bark also don't look correct for true Desert Ironwood.

Jason

Re: Ironwood

#10

Jim Evans

Re: Ironwood

Jim Evans

I was going by what I was told. If not ironwood I wonder what it is? I know it is heavy and hard as a rock.

Re: Ironwood

#11

Jim Evans

Re: Ironwood 

Jim Evans

Jason,

After doing some looking I think what I have is American Hornbeam Carpinus caroliniana.



This picture comes real close to what it looks like.

Re: Ironwood

#12

Re: Ironwood 

Mike Foster

I would agree with Jason. All the desert ironwood I've seen is quite dark, sometimes with lighter streaks as in the photo below. It does seem to have a lot of checking. It is really beautiful once a piece is completed, but you pay for it. It produces some of the nastiest dust I've come across. Smells pretty bad, and it is really fine and tends to get into clothes and the pores of your skin. I have never had a bad reaction, but I always use my powered respirator when turning and carving it.

For a real eye-opener, check out how the Yaqui indians carve it. I visited one (who sold me the wood used below) in his shop. It was an open cabana and he used a motor mounted on a tablesaw type stand with a belt that ran up to an arbor that held a naked 10" sawblade. The carver would power this up and hold the wood up to the spinning blade. My jaw hit my chest and my heart rate went through the roof watching him. Perhaps not OSHA compliant, but he lives south of the border so it's all OK.


Re: Ironwood

#13

Re: Ironwood

Joe Herrmann

someone gave me a bunch of small pieces that I thought I could use for bottle stoppers. Unfortunately, the grain was going the wrong way and, after shuttling them around the shop for several years, decided to get rid of them. Being winter, I thought what a better way than to burn them in the wood stove so I pitched a half dozen pieces in--they burned really hot. However, we had to leave the house for several hours while the stink cleared. I managed to find another way to dispose of the rest!

Re: Ironwood

#14

Yep Hornbeam

Keith Newton----Little Rock, Arkansas

It grows all over the place down at the cabin. It may be hard and strong, but is very prone to quick decay, and insect damage.

It is cream color, with a strong medular ray, that can be interesting, especially with the natural surface, but I would only work it green and fresh if it were me, I would consider it trash in that condition, if it were mine.