Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Gel Pads

Posts

Gel Pads

#1

Gel Pads

Darryl

A couple of years ago I had an accident that ultimately resulted in a total hip replacement. The other day I went for an annual review. I mentioned to the Nurse Practitioner who reviewed the pictures etc that my hip was sore particularly after spending several hours at the lathe. Since I have very little "meat" left over the bone near the incision she suggested I probably had mild bursitis. She was familiar with the "turners shuffle" since her husband also turns. She suggested I try the "Gel Mats" sold by Home Depot in the rug department. They are about 2'X3' and are in the Martha Stewart collection of mats. It was just what the doctor ordered. they are about 1 inch thick and soft but firm. Anyway they did the trick. Spent about 6 hours wiggling yesterday and no soreness. They cost about $20 or so and even though our store only carries them in an icky off brown color they are worth it.

Re: Gel Pads

#2

Re: Gel Pads

Chuck Bjorgen

Thanks for the tip. Both hips done in my case although at 75 I don't think I could turn for six straight hours. Just moved my turning operation from the basement to my garage. I'll check out those mats.

Re: Gel Pads

#3

Re: Gel Pads

R. Payne

I have a military sleeping pad (I think 2'X6' foam) in front of my lathe to stand on. Much better than the concrete in the garage. I don't know how it compares to the gel pads. I can get it from a local surplus store for about $6 US.

ron

Re: Gel Pads

#4

Re: Gel Pads

Emmett Manley, Lakeland, TN

If you have a Tractor Supply Store in your area, check out their Royal Mat Rubber Horse Stall Mats for $39.95. These heavy duty mats are 4' x 6,' non-slipping, long lasting and provide great support for your legs. They can be cut with a box cutter if a custom fit is needed.

Re: Gel Pads

#5

Don Leydens

Re: Gel Pads

Don Leydens

Isn't it great when a medical problem can be fixed with a simple and inexpensive solution? Man, that's great. Continued pain free turning!