Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Diving in *LINK*

Posts

Diving in *LINK*

#1

Diving in *LINK*

Nathan

When I did my first apprenticeship in cabinetmaking, I spent a day at the lathe. I really enjoyed it, so since that time I've been waiting for a good one to "turn" up in the local market (in the Czech Republic - lots of used wood- and metalworking machinery clunking around here) to add to my shop.

So now I'm looking at this lathe, plus all the accessories shown (37 turning tools, several heads, etc.) for the equivalent of (U.S.) $1,100. It belonged to an older fellow who made a living restoring furniture - the seller bought it from him (or his estate) and never did more than play around with it.

Opinions? Anything to watch out for? I'm first in line to buy it. It seems to me the tooling alone is worth at least $1,100.

Click here to look at the ad:


Lathe for sale

Re: Diving in *LINK*

#2

Ken Vaughan

Re: Diving in

Ken Vaughan

Nathan --

Looks to be like the lathe and tooling have been around for quite a while.

the tooling also appears to be old. The chuck is one that is commonly used on metal lathes and lacks many of the features of the scroll chucks that have been on the market since the 80s (I have a Nova from those days).

I suspect that some/much/all the lathe tools are high carbon steel. High carbon steel worked well and was all there was until the late 60s -- and it works, but edges do not last long (durability) when compared to high speed steel and especially the powdered metal steels.

Old gear that has been well used can be a roll of a dice for reliability and availability of parts.

For my perspective -- the risks make the price significantly high. For me, very significantly high -- and I like restoring old tools.

Re: Diving in *LINK*

#3

Re: Diving in *LINK*

Chuck Engstrom

Hi Nathan -- I'm inclined to agree with Ken on this. The lathe is a pretty big piece of iron and there is a lot of tooling, but I don't think this would add up to $1,100 in the US market.

A couple of things to consider..

Is the speed adjustable in any way? How easy is it to do? Current lathes in the US are almost all fully speed-adjustable just by turning a dial to control the electronics that feed the motor, and they can be reversed by the flip of a switch. It looks like it may have what we know here as a Reeves drive but I can't see enough to be sure. Reeves drives are OK but often troublesome to replace the belt.

Is it long enough for the work you want to do? It appears to have a generous height above the bed but the bed doesn't look very long for stairway balusters, table legs, etc -- I needed all of 1.25 meters last week for a piece.

The tools are very abundant, yes, but as Ken points out, probably older varieties of steel, and probably some duplicates as well.

Would its headstock accept currently available items like our present-day chucks and Morse taper drives and live centers? If you find yourself wanting to add to the equipment this would be an issue.

I realize that here in America we are very spoiled and accustomed to having many choices of the latest stuff that is more/better/faster, so perhaps I shouldn't discourage you too strongly when your market is probably quite different.

I spent some time last weekend with folks who have been to Prague and spoke very warmly about their experience in Czechoslovakia -- "best beer in the world." He is Czech by heritage and a turner also (link below), and he has lots of old machines himself. He specializes in turning tap handles for breweries as a significant part of his business.

Best wishes on getting back to turning -- keep us informed of your progress.


http://www.marksupikco.com/

Re: Diving in *LINK*

#4

A couple more thoughts in response

Nathan

Thanks to Ken and Chuck and looking forward to hearing more opinions. I will find out what's under the hood on the headstock in terms of changing speeds.

And yes, Chuck, you are right about markets. The huge U.S. market makes for a lot of specialized "stuff" targeted at hobbyist shops that isn't available here in Europe, where most woodworkers are pros and - I might add - laminated particleboard is king!

This offer appeals to me because it's obviously a machine that someone did real work on, and it comes with an array of accessories. In my mind, this puts a ceiling on the investment.

My teacher built his own lathe during the Communist period. The head and tail stocks are aluminum castings. It only has three speeds and he's only got seven knives and no scroll chuck. Yet somehow he manages to do a lot with it.

I looked at new lathes in this class and they are all upwards of $2,000. And you're right, they've got the built-in VFD and the rotating headstock and all the other modern features, and all tooling is extra.

Hopefully, I'll get set up for turning one way or another, and someday one or more of you will stop by my shop when you decide to visit Prague and the Czech Republic. Your friends are right - it's a beautiful city and a nice country, and the beer is definitely good, too. I've enjoyed my share of it for sure!

Re: Diving in *LINK*

#5

Richard Allen

Re: A couple more thoughts in response

Richard Allen

Yes a LOT of wonderful woodturning is done using less than state of the art equipment.

State of the art equipment does not insure that you will be able to turn wonderful things.

Modern equipment is geared toward face plate turning. Old equipment is geared toward spindle turning. While you can do either on each lathe the modern lathe will help in a desire to become an expert.

The price of $1100 seamed rather steep to me. You mention that there are a lot of old lathes for sale in your area. I would be looking to see what other opportunities are available.

Some folks feel that a good price makes a lathe a good deal. That lathe, if everything works okay, would be a good deal at $300 not $1100. You can't compare an old lathe to a modern lathe in terms of value.

Re: Diving in *LINK*

#6

Re: Diving in

Howard Norman

Here in the US I would consider this lathe overpriced but I can't say anything about the price in the CZ Republic. We are spoiled here in the US because of a lot of new lathes being available at reasonable prices.

If I were you I would be comparing this lathe to others that may be available locally and make my decision base on that information, instead of what someone in the US has to say about the potential purchase.

Best of luck to you in your decision.

howard

Re: Diving in *LINK*

#7

Re: Diving in

Barry L Elder

I have to agree with Norman in that we know nothing of your culture or society. You should check with some of the European turners and artists and probably get a much more knowledgeable opinion. Why not offer the seller 800 or 900 to sell if he's willing to bargain, and maybe the dive-in won't be so steep. You will still need another thousand or two to modernize your accessories.

Re: Diving in *LINK*

#8

Re: Diving in

Barry Irby

I agree with all those who said it appears overpriced by our standards. Can't comment on your economy.

The box on the end has me a little confused. No idea what it is for. I would be a little worried about getting a finger or some skin caught in it somehow.

Not to start a huge war here, but you really don't need fifty turning tools. About ten will do most of what you want to do. OK, lets double that and say 20. The important thing is to have the right ten or twenty and once you figure out which ones you like and use, you may never use the others. I probably have thirty or forty but actually use about ten. Better to have the right ten and expand form there. My point is that I would be a lot happier with that lathe and 20 tools at $600.

Re: Diving in *LINK*

#9

I hear you

Nathan

Thanks. Based on your opinions, I have nixxed this lathe. Now I'm considering something like this:


img

Re: Diving in *LINK*

#10

Now, seriously

Nathan

True, the market here is very different. Here's another example - this one is being offered for $800 (without the dust collector). I'm always a bit distrustful, though, when I see machines that have a tool support a-la metal lathes. But maybe it could be useful?


img

Re: Diving in *LINK*

#11

Better picture and more info

Nathan

Is the speed adjustable in any way? How easy is it to do?

I'm fairly certain it's got a Reeves drive. I found a local shop that has the same machine. Here's a picture of theirs:


When I get in contact with them, I will ask how they like it. I don't think people are going to be lining up to buy this lathe, and there are plenty others on the market, so I will wait and gather more information.

Thanks for your help.

Re: Diving in *LINK*

#12

Re: Diving in

Don Evans

Barry, not to pick on you, but your comments are interesting. In fact I have found this whole thing interesting. Why, because he is going through what a few of us on the forum when through when we started turning. For me that was in the 70's. Most all us then started on metal lathes we converted. I was lucky and actually started on a used wood lathe that ironically was being used at a pro shop to turn metal! A 1954 Delta floor model, still got it but don't use it.

Where he is there are probably extremely few wood shops that have scroll chucks etc much less hobby folks. You have to make accessories when I started, the only thing that was available was a faceplate and may be a real shock to us in USA but there is lot of very nice stuff made with out all the stuff made now as accessories. You have to think and be inventive back then. What we have available now is NOT necessary BUT it adds a tremendous SAFETY element to the hobby. Only time I've ever hurt myself on a lathe was with a 1970's home made model of what would be called a Longworth chuck now. But that was caused by lossing concentration for a split second.

Nathan this is a real guess so keep that in mind, but this based on location is probably a fair deal. I would judge a lot on hearing it run and seeing it in action before handing over my money though.

In some societies it is bad manners to try and talk someone down from their price on a private sale and just the opposite at others. What is the mood there on this subject?

Don

Re: Diving in *LINK*

#13

Steven Antonucci

I am dumbfounded?

steven antonucci

It appears that the lathe swings about 24" and can go 48" long and that folks think $1100 is way too much to pay for that? I don't think I've ever seen something that big and that inexpensive, or I would probably own it.

Assuming that the mechanic on the lathe were perfect, because it might be really difficult (and expensive) to repair, I'd buy the whole lot. Perhaps you can haggle the price a bit. You could also sell off all of the old tooling that would work fine, but isn't the shiny new stuff. Maybe get $200 for all of it?

I'd buy the first one you posted before the second one, condition being equal.

S

Re: Diving in *LINK*

#14

It appears the swing capacity on......

JamieDonaldson

...this second one is much less than the first, and that's a primary consideration for a bowl turner. >(

Re: Diving in *LINK*

#15

Box on the end

Nathan

The box on the end has me a little confused. No idea what it is for.

When this picture was taken, the lathe was set up with a sanding plate on the left side of the spindle. The box acts as a table for that = put the workpiece on the table and press it into the sanding disc. I assume the angle between the disc and the table is 90 degrees.