Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Don Riggs and Celebration Gouge

Posts

Don Riggs and Celebration Gouge

#1

Don Riggs and Celebration Gouge

Ed Moore in SW VA

In a previous post I mentioned that I was going to get a new 15V bowl gouge to celebrate being declared N.E.D. (No Evidence of Disease). I will not mention N.E.D. again.

This morning my good friend Don Riggs and I put a large piece of cherry on the lathe and we started to turn a natural-edged bowl. We used a 5/8" gouge to start and then I switched to the new 15V gouge. Wow! The stupid grin on my face appeared, as anticipated. Don turned more than I did so far, so I took his picture.


Don is well-known to the Capital Area Woodturners in DC and to many of us in the Roanoke area. He is an authentic war hero, having almost 300 night carrier landings when serving in Viet Nam. He is also a favorite demonstrator for many woodturning clubs.

Don and I agree, my Celebration Gouge is one sweet tool.

Ed

Re: Don Riggs and Celebration Gouge

#2

Mike Stafford

Re: Don Riggs and Celebration Gouge

Mike Stafford

Don is a friend of mine and is one of the most entertaining demonstrators I have seen in a while. You just cannot believe the things he can do with his Michelsen grind bowl gouge that is only about 4 inches long. He has ground it down to where there is just not much left of the tool but he can "git er done" with that little tool.

When he demoed for our club he used that bowl gouge to turn a sphere without benefit of any gauges or templates in a very few minutes and then went on to turn a l-l-l-l-o-o-o-o-n-n-n-n-g-g-g-g stemmed goblet with a stem about 1/8" thin. He was very entertaining. (A disclaimer: He also brought me a truck load of ambrosia maple that Ed had scavenged.)

My only regret is this report does not include the "pudding face" photo of Ed Moore that I so desperately wanted to add to my collection. ;)

Glad to see you two youngsters having so much fun. With you guys occupied as you were there must have been a severe drop in tool sales around the country but I am sure you will make up for it quickly. :b

Re: Don Riggs and Celebration Gouge

#3

Re: Don Riggs and Celebration Gouge

Harvey Ghesser

Looks like a Glaser to me!

Re: Don Riggs and Celebration Gouge

#4

Re: Don Riggs and Celebration Gouge

Ed Moore in SW VA

It cuts like a Glaser too! :D :D

Re: Don Riggs and Celebration Gouge

#5

Re: Don Riggs and Celebration Gouge

Charlie Anderson

I made sure to wear my Thompson Lathe Tools tshirt to the CAW meeting last Sat!!!!!!!!!!!!!!

Re: Don Riggs and Celebration Gouge

#6

Steven Antonucci

Celebration Gouge...hmm?

steven antonucci

With recent events in life, I think a celebration gouge may be in order? Perhaps even a celebration lathe...

Good on you, Ed. We should all celebrate a little more.

S

Re: Don Riggs and Celebration Gouge

#7

Mike Stafford

Re: Celebration Gouge...hmm?

Mike Stafford

As a friend told me recently, "Enjoy life, it's later than you think...."

My intention is have the check for my funeral bounce..... :D

Re: Don Riggs and Celebration Gouge

#8

Keith Tompkins

Re: Celebration Gouge...hmm?

Keith Tompkins

I like the Triumph motorcycle ad: "What are you waiting for?..You'll be dead a long time!"

Re: Don Riggs and Celebration Gouge

#9

Steven Antonucci

Live every day like it was you last...

steven antonucci

because one day, it will be.

I also intend to wear out everything on my organ donor card before I go...

S

Re: Don Riggs and Celebration Gouge

#10

Dale Jablonski

Re: Live every day like it was you last...

Dale Jablonski

I couldn't agree with you more! Thanks for the reminder. Peace

Re: Don Riggs and Celebration Gouge

#11

Re: Celebration Gouge...hmm?

Paulo Marin

You are so funny Mike! I gotta use that one too... Bounce the check to the funeral home lol..

I was told once that landing a jet on an aircraft carrier in the middle of the ocean, is like balancing a broomstick on your nose after a whole bottle of tequila..DRiggs is a true american hero in my book...

I'm glad he is having fun with Ed... At least he is putting the Glaser tool to the test instead of making more Christmas ornaments... The north pole has had enough of christmas ornaments from Santa's favorite Elf Ed Moore :)

Re: Don Riggs and Celebration Gouge

#12

Now what was that ...

Ed Moore in SW VA

about tequila?

:b :D :D